DIY digital audio delay?(horns)

mike.e · 10th December 2004, 03:36 AM

Hi all Digital noob here. (only basic knowledge of AC/DC analog etc)

After viewing

26 Digital Delay (Mitsubishi M65830 Digital Delay chip) at the ESP site

I was wondering,if it is possible that another project like this is about(that atleast uses a chip that is still being manufactured),but instead has variable delay,in moderately small steps.The usage is for audio ofcourse,with long pathlength basshorns in the home.

Cheers!

mike.e · 15th December 2004, 01:23 AM

-|°Bump.

rfbrw · 15th December 2004, 03:10 AM

The project you link to has analogue inputs. If your audio source is analogue you might want to try posting in the analogue forum if you haven't already done so. If it is digital, how long a delay or what size steps are you after?

mike.e · 15th December 2004, 04:03 AM

Ah Yes it would have both analogue input and output
[ie non delayed audio signal in,and delayed audio signal out]

Am wanting a delay,perhaps in 5ms increments from 0-30ms

Il try in the analog forum.

Thanks alot

sam9 · 17th December 2004, 05:55 AM

It looks like NJU9702 is a pin for pin equivalent. It is available but expensive. MCM lists them for US$25 each -- and only with a 30 day backorder delay. Mouser will sell them for ~$5.50 but minimum quantity is 100 !! Anyway if you want it bad enough it can be had.

mike.e · 21st December 2004, 12:39 PM

Thanks,since then,some one has informed me of a certain range of BBD which i should be able to use.

rick57 · 7th February 2005, 11:10 AM

Hi Mike

I'm likely to want to want do similar, and so may others.
Can you share your new knowledge with us, eg which BBD, and is there a circuit layout/ link??

Thanks

Richard

10th December 2004, 03:36 AM	#1
mike.e diyAudio Member Join Date: Sep 2004 Location: NZ	DIY digital audio delay?(horns) Hi all Digital noob here. (only basic knowledge of AC/DC analog etc) After viewing 26 Digital Delay (Mitsubishi M65830 Digital Delay chip) at the ESP site I was wondering,if it is possible that another project like this is about(that atleast uses a chip that is still being manufactured),but instead has variable delay,in moderately small steps.The usage is for audio ofcourse,with long pathlength basshorns in the home. Cheers!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
digital reverb or delay	lulu	Digital Line Level	56	25th November 2008 06:53 AM
Delay - echo through BL and FL horns	jamikl	Multi-Way	4	3rd April 2006 06:52 AM
Digital delay	piman	Digital Source	10	16th December 2004 09:31 AM
need for simple all pass digital delay	mr_ro_co	Digital Source	6	20th January 2004 10:04 PM
digital delay	Jack Thomas	Digital Source	1	1st August 2002 02:02 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th December 2004, 01:23 AM	#2
mike.e diyAudio Member Join Date: Sep 2004 Location: NZ	-\|°Bump.

15th December 2004, 03:10 AM	#3
rfbrw diyAudio Member Join Date: Oct 2001 Location: .	The project you link to has analogue inputs. If your audio source is analogue you might want to try posting in the analogue forum if you haven't already done so. If it is digital, how long a delay or what size steps are you after?

15th December 2004, 04:03 AM	#4
mike.e diyAudio Member Join Date: Sep 2004 Location: NZ	Ah Yes it would have both analogue input and output [ie non delayed audio signal in,and delayed audio signal out] Am wanting a delay,perhaps in 5ms increments from 0-30ms Il try in the analog forum. Thanks alot

17th December 2004, 05:55 AM	#5
sam9 diyAudio Member Join Date: Jun 2002 Location: Left Coast	It looks like NJU9702 is a pin for pin equivalent. It is available but expensive. MCM lists them for US$25 each -- and only with a 30 day backorder delay. Mouser will sell them for ~$5.50 but minimum quantity is 100 !! Anyway if you want it bad enough it can be had.

21st December 2004, 12:39 PM	#6
mike.e diyAudio Member Join Date: Sep 2004 Location: NZ	Thanks,since then,some one has informed me of a certain range of BBD which i should be able to use.

7th February 2005, 11:10 AM	#7
rick57 diyAudio Member Join Date: Dec 2002 Location: dry ol Melbourne Australia	Hi Mike I'm likely to want to want do similar, and so may others. Can you share your new knowledge with us, eg which BBD, and is there a circuit layout/ link?? Thanks Richard

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)