WANTED: A good translation of the following Chinese DIY article - Page 2

EchiDna · 24th July 2002, 11:09 PM

thanks JetDog and Chris!

it sure looks to be what I'm after ;-)
now all I have to do is find out how to get one!
(I can handle that from here) If and when I get my hands on this, I will let you know how it goes.

jetdog · 25th July 2002, 04:07 PM

I had a sch of version 1,but hadn't got the control program

nFORCE · 30th July 2002, 01:45 AM

Hi all,

I will goto Taiwan next month, I will try to buy one (this board with MCU) and hope the MCU Protection is unlock, so I can duplicate or dump the HEX code and release to all.

Regards,
nFORCE

nFORCE · 30th July 2002, 02:15 AM

I get this in China.

http://www.netsh.com.cn/wwwboardm/81...ges/16266.html

The post is RMB80 (around USD$10).

I will try to order 5 set.

Anyone interest, I will try to talk them to get a lower price.

Regards,
nFORCE

trigon · 30th July 2002, 03:37 AM

Hope this helps.

AltaVista - World - Translate

Trigon.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help wanted please - Linsley Hood article index	Geoff	Everything Else	2	5th March 2013 04:57 AM
Good John Curl Article on Capacitors	Zero Cool	Everything Else	33	18th July 2010 05:30 PM
Found a good article on using a microscope to check stylus wear	ALustyGhost	Analogue Source	0	17th November 2008 01:53 PM
good book/article about using oscilloscopes?	audio_moksha	Tubes / Valves	8	9th March 2008 09:39 PM
Good DIY Transformer Article (in Thai)	astouffer	Tubes / Valves	0	22nd December 2005 02:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th July 2002, 11:09 PM	#11
EchiDna diyAudio Member Join Date: Jul 2002 Location: Singapore	thanks JetDog and Chris! it sure looks to be what I'm after ;-) now all I have to do is find out how to get one! (I can handle that from here) If and when I get my hands on this, I will let you know how it goes.

25th July 2002, 04:07 PM	#12
jetdog diyAudio Member Join Date: Oct 2001	I had a sch of version 1,but hadn't got the control program

30th July 2002, 01:45 AM	#13
nFORCE diyAudio Member Join Date: Jul 2002 Location: JAPAN	Hi all, I will goto Taiwan next month, I will try to buy one (this board with MCU) and hope the MCU Protection is unlock, so I can duplicate or dump the HEX code and release to all. Regards, nFORCE

30th July 2002, 02:15 AM	#14
nFORCE diyAudio Member Join Date: Jul 2002 Location: JAPAN	I get this in China. http://www.netsh.com.cn/wwwboardm/81...ges/16266.html The post is RMB80 (around USD$10). I will try to order 5 set. Anyone interest, I will try to talk them to get a lower price. Regards, nFORCE

30th July 2002, 03:37 AM	#15
trigon diyAudio Member Join Date: May 2002 Location: Canada	Hope this helps. AltaVista - World - Translate Trigon.