Philips CD 960 Belts

[bigal]

I need to replace all of the drawer & drive belts in my CD 960 ( I believe there are 3 or 4 ). Any one know the Philips part #s, a source of supply and or substitute belts.
Thanks,
Al

 

[Elso Kwak]

I need to replace all of the drawer & drive belts in my CD 960 ( I believe there are 3 or 4 ). Any one know the Philips part #s, a source of supply and or substitute belts.
Thanks,
Al

Hi Al,
You have mail.
The beltnumbers are in the manual!
You can alo take the old belts to a partshop carrying belts and search for a slightly shorter belt with the same thickness. This proves to work well.

 

[oaktsh]

hi bigal,
i happened to have the same problem with my 960. I was able to replace the belts by buying similar ones at Orchard Supply for pennies. my 960 is loading and working perfectly. take your time and becareful not to damage the springs when you work with the loading tray. there should be plenty of orchard supplies in california

 

[tiefbassuebertr]

check out also this thread:
http://www.diyaudio.com/forums/digital-source/89200-help-philips-cd960.html#post2226966