Ceramic resonator pinout

trwh · 21st July 2002, 12:01 PM

Hi

Just a quick newbie question. For a 3 pin ceramic resonator, is the pinout diagram attached correct?

Thanks!
TRWH.

Elso Kwak · 21st July 2002, 12:07 PM

Hi trwh,
Yes, your picture is correct but <B>don't</B> use this thingie in a low jitter clock like the KWAK-CLOCK. Do use a real quartz crystal!

trwh · 21st July 2002, 12:35 PM

Hi Elso, thanks for your reply.

I intend to use the ceramic resonator with a PIC16C54XT microcontroller, in a remote volume control circuit driving a motorised pot. I am copying the circuitry from a schematic in an amplifier service manual since a) I am a newbie, and b) so I can be sure that the control will work with my remote!

See ya,
TRWH.

21st July 2002, 12:07 PM	#2
Elso Kwak Banned Join Date: Dec 2001 Location: Zamboanga, City of Flowers, Mindanao	Ceramic Resonator Pinout Hi trwh, Yes, your picture is correct but <B>don't</B> use this thingie in a low jitter clock like the KWAK-CLOCK. Do use a real quartz crystal!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Resonator guitars	PhaseLockLoopy	Instruments and Amps	3	30th May 2008 04:28 PM
Cabinet brace act as helmholtz resonator?	RyanW	Multi-Way	17	2nd October 2007 11:08 PM
replace ceramic resonator with quartz crystal in cheaper CD players	wa2ise	Digital Source	26	30th December 2005 01:42 AM
Horn-Resonator?	TroelsM	Multi-Way	5	29th September 2005 02:23 PM
isobaric resonator?	tade	Subwoofers	6	17th August 2005 07:24 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st July 2002, 12:35 PM	#3
trwh diyAudio Member Join Date: Apr 2002 Location: UK	Hi Elso, thanks for your reply. I intend to use the ceramic resonator with a PIC16C54XT microcontroller, in a remote volume control circuit driving a motorised pot. I am copying the circuitry from a schematic in an amplifier service manual since a) I am a newbie, and b) so I can be sure that the control will work with my remote! See ya, TRWH.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)