Help!!! Marantz CDP no sound output!!!

kevin2059 · 29th November 2004, 07:55 AM

I bought old Marantz CD-73 several days ago; it can play CD but no audio output!

(Marantz CD-73 architecture is similar PHILIPS CDP, Chipsets: TDA1540, SAA7000, SAA7010, SAA7020, SAA7030)

I do these troubleshooting:

1) Check OPA NE5532 no any signal input when CDP playing.

2) Check all power condition is normal.

3) Check SAA7000 clock is normal.

4) Check SAA7010 pin "HF¡¨ input 1Vp-p with 2VDC signal when CDP playing.

5) Found SAA7030 output pin status:
(a) Pin "CLFD" always LO
(b) Pin "LAT" always LO
(c) Pin "DRFD" always HI

6) Found SAA7030 input pin status:
(a) Pin"CLCF" always LO
(b) Pin"STRI","DLCF","DRCF" always have digital signal input.

7) Check "Mute" signal is normal.

Who can tell me how to further troubleshooting? Please help me!!! Thank you!

TDA1540 · 29th November 2004, 02:18 PM

have you checked the CLCFsignal at the output of the saa7000?(pin14)

kevin2059 · 29th November 2004, 03:17 PM

Yes! The SAA7000 pin14 CLCF is connect to SAA7030 pin18 CLCF,and CLCF always at LO level.

I found SAA7020 pin36 UNEC is at LO level when CD playing.

Signal flow :
Transport CDM-0 "HF"--->SAA7010-->SAA7020-->SAA7000-->SAA7030-->Dual tda1540-->OP NE5532

TDA1540 · 29th November 2004, 05:32 PM

Hi Kevin,

does pin14 (saa7000) output anything if it is disconnected?

and how about pin16?soldering ok?

kevin2059 · 29th November 2004, 11:58 PM

Strangely! I remove chip SAA7030 and check SAA7000 pin14 CLCF is available!
Re-Install SAA7030 and pin18 CLCF is available, too!

But, SAA7030 output status: (a) pin8 CLFD still always Hi (b) pin7 LAT still always LO (c) pin10 DRFD still LO
There is no data input to DAC TDA1540!

I remove two TDA1540 and check SAA7030 output pins again, but status still fails!
The chip SAA7030 is malfunction?

SAA7020 pin36 UNEC always LO level when CD playing.The condition is ok?

Thanks your further guidance!

ps. (SAA7000 pin16 "14/16 test¡¨ is connect to ground and condition is normal ! )

kevin2059 · 30th November 2004, 06:28 AM

I have another CDP Philips CD-204, remove chip SAA7030 and replace on Marantz CD-73.

It works!

So, I am sure chip SA7030 malfunction!

But, I have another problem: Who have selling SAA7030? Help! Somebody can tell me?

Thanks!

29th November 2004, 07:55 AM	#1
kevin2059 diyAudio Member Join Date: Apr 2004 Location: Taipei	Help!!! Marantz CDP no sound output!!! I bought old Marantz CD-73 several days ago; it can play CD but no audio output! (Marantz CD-73 architecture is similar PHILIPS CDP, Chipsets: TDA1540, SAA7000, SAA7010, SAA7020, SAA7030) I do these troubleshooting: 1) Check OPA NE5532 no any signal input when CDP playing. 2) Check all power condition is normal. 3) Check SAA7000 clock is normal. 4) Check SAA7010 pin "HF¡¨ input 1Vp-p with 2VDC signal when CDP playing. 5) Found SAA7030 output pin status: (a) Pin "CLFD" always LO (b) Pin "LAT" always LO (c) Pin "DRFD" always HI 6) Found SAA7030 input pin status: (a) Pin"CLCF" always LO (b) Pin"STRI","DLCF","DRCF" always have digital signal input. 7) Check "Mute" signal is normal. Who can tell me how to further troubleshooting? Please help me!!! Thank you!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marantz CD 67 (no output)	Rosscopecotrain	Digital Source	6	24th October 2008 05:36 AM
Marantz CD63KI - XO clock in, sound bad...	Zombie	Digital Source	30	2nd April 2008 07:02 PM
Marantz CD-7 audio output mod.	D.A.R.R.Y.L.	Digital Source	23	5th June 2006 08:23 AM
no FM sound on marantz 2245	llib	Analogue Source	2	27th November 2005 02:22 AM
I2S digital output in Marantz CD4000 and four TDA1541A with balance analog output	iklari14	Digital Source	30	18th July 2003 12:57 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th November 2004, 02:18 PM	#2
TDA1540 diyAudio Member Join Date: Feb 2004 Location: Ehv	have you checked the CLCFsignal at the output of the saa7000?(pin14)

29th November 2004, 03:17 PM	#3
kevin2059 diyAudio Member Join Date: Apr 2004 Location: Taipei	Yes! The SAA7000 pin14 CLCF is connect to SAA7030 pin18 CLCF,and CLCF always at LO level. I found SAA7020 pin36 UNEC is at LO level when CD playing. Signal flow : Transport CDM-0 "HF"--->SAA7010-->SAA7020-->SAA7000-->SAA7030-->Dual tda1540-->OP NE5532

29th November 2004, 05:32 PM	#4
TDA1540 diyAudio Member Join Date: Feb 2004 Location: Ehv	Hi Kevin, does pin14 (saa7000) output anything if it is disconnected? and how about pin16?soldering ok?

29th November 2004, 11:58 PM	#5
kevin2059 diyAudio Member Join Date: Apr 2004 Location: Taipei	Strangely! I remove chip SAA7030 and check SAA7000 pin14 CLCF is available! Re-Install SAA7030 and pin18 CLCF is available, too! But, SAA7030 output status: (a) pin8 CLFD still always Hi (b) pin7 LAT still always LO (c) pin10 DRFD still LO There is no data input to DAC TDA1540! I remove two TDA1540 and check SAA7030 output pins again, but status still fails! The chip SAA7030 is malfunction? SAA7020 pin36 UNEC always LO level when CD playing.The condition is ok? Thanks your further guidance! ps. (SAA7000 pin16 "14/16 test¡¨ is connect to ground and condition is normal ! )

30th November 2004, 06:28 AM	#6
kevin2059 diyAudio Member Join Date: Apr 2004 Location: Taipei	I have another CDP Philips CD-204, remove chip SAA7030 and replace on Marantz CD-73. It works! So, I am sure chip SA7030 malfunction! But, I have another problem: Who have selling SAA7030? Help! Somebody can tell me? Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)