Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

NAD 5240 cd player problems
NAD 5240 cd player problems
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th October 2004, 11:50 AM   #1
bmwdriver325i is offline bmwdriver325i  United States
diyAudio Member
Join Date: Sep 2004
Location: california
Default NAD 5240 cd player problems

I have two problems with this cd player, with some cds it has trouble tracking, and it will not play cdr's though I've read that it can, second the display is gone, if you look really close with a bright light you can see it but it does not emit any light, any help would be much appriciated, thanks
  Reply With Quote
Old 27th October 2004, 04:01 AM   #2
Extreme_Boky is offline Extreme_Boky  Australia
diyAudio Member
Join Date: Dec 2003
Location: Sydney

Re tracking problem:

Not all CDs have the same reflectivity. CD-Rs have even lover. The laser diode looses its ability to output a proper (high enough) laser beam.
Check your PCB and look for a test point labelled RF. Insert a CD that your CD player has problem reading. Monitor the RF signal on oscilloscope and look for an eye-pattern. It should be 1.5(+ or - 0.3) Vp-p. If it is lower than 1.2V you'll have the problem where the pick-up reads some disks, and does not read ones with low reflectivity. You can increase the laser output by adjusting the little trim-pot located on the pickup itself. Do not go over 1.7 - 1.8 volts. After adjustment try CD-R disk and check the amplitude.

Re display problem:

Your display should have 'heating' voltage (usually labelled F1 and F2) of around 3 or 4V AC - check if this is present. Displays also use -33V DC or close to this value, and sometimes + or -5V DC as well. With your CD player being made in UK, check for burnt-out resistors in the heating circuitry.

Good luck!
  Reply With Quote


NAD 5240 cd player problemsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
CD player problems jmillerdoc Parts 0 22nd March 2009 01:19 AM
CD player supply problems Mikhail Digital Source 4 13th December 2006 09:39 AM
Onkyo CD Player Problems Fat Man Digital Source 0 13th March 2004 12:37 PM
JVC XL-V120 cd player problems rbroer Digital Source 2 30th October 2003 07:30 AM
CDM4 player problems rbroer Digital Source 7 24th September 2003 08:27 AM

New To Site? Need Help?

All times are GMT. The time now is 03:25 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio