Fisher DAC-9335 Problem

Rodder · 9th October 2004, 02:31 AM

Hi All,

I have a fisher DAC-9335, 24 disc CD changer. My son blew the speakers on the stereo a few years back and it has not been used since. Last week I got new speakers. When I hooked up and turned on the stereo the CD changer worked. I loaded a CD and played it to check the system. Then when I went to load more CD's an "m-error" message scrolled across the screen. The manual said to reset the system by unplugging the power cable and plugging it back in. However, it still will not load or unload CD's and the "m-error" message scrolls across the screen.

I have one CD in the number one slot and it plays but that is it. As soon as I try to load, I get the message.

Has anyone run into this problem before. I would really appreciate any help.

Thanks in advance,

Rodder

gmphadte · 18th October 2004, 06:40 AM

Quote:

...blew the speakers on the stereo a few years back and it has not been used since.

You need to open up the changer and find out the condition of the rubber belts in the mechanism.

Gajanan Phadte

Ned2865 · 21st April 2005, 01:17 PM

Lolll!! The rubber belt!! We can clearly see that you're talking through your hat as there's NO BELT into that model and also ALL the Fisher 24 disc changers. Instead, you have to change two idler gear, one is located near the front of the unit, where the loading mecanism is, and the second is where the loading disc is, near the bottom left of the unit. Those two idler gear are not expensive but this is quite a job to change them as you have to lift up the whole mecanism. Good luck!

9th October 2004, 02:31 AM	#1
Rodder diyAudio Member Join Date: Oct 2004	Fisher DAC-9335 Problem Hi All, I have a fisher DAC-9335, 24 disc CD changer. My son blew the speakers on the stereo a few years back and it has not been used since. Last week I got new speakers. When I hooked up and turned on the stereo the CD changer worked. I loaded a CD and played it to check the system. Then when I went to load more CD's an "m-error" message scrolled across the screen. The manual said to reset the system by unplugging the power cable and plugging it back in. However, it still will not load or unload CD's and the "m-error" message scrolls across the screen. I have one CD in the number one slot and it plays but that is it. As soon as I try to load, I get the message. Has anyone run into this problem before. I would really appreciate any help. Thanks in advance, Rodder

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fisher kx-100 Recitfire problem	Audimax	Tubes / Valves	6	23rd November 2009 08:56 AM
Fisher X-101-D	bsgd	Tubes / Valves	6	27th April 2009 08:05 PM
Fisher 800c neg bias problem	Glowin Plates	Tubes / Valves	10	26th September 2008 08:39 AM
Fisher 500-C	crick	Parts	0	8th July 2007 05:43 PM
Fisher 800C FM Stereo problem	Glowin Plates	Tubes / Valves	5	2nd April 2004 10:46 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st April 2005, 01:17 PM	#3
Ned2865 diyAudio Member Join Date: Apr 2005 Location: Montreal	Lolll!! The rubber belt!! We can clearly see that you're talking through your hat as there's NO BELT into that model and also ALL the Fisher 24 disc changers. Instead, you have to change two idler gear, one is located near the front of the unit, where the loading mecanism is, and the second is where the loading disc is, near the bottom left of the unit. Those two idler gear are not expensive but this is quite a job to change them as you have to lift up the whole mecanism. Good luck!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)