ponyprog

nbcd · 1st October 2004, 09:39 AM

hy all,
I have some problems with the pic 16f84.Let's say these are only documentation problems.I dont find out what's the point with the CON 10 connector from here: http://www.lancos.com/e2p/si-prog-v2_2.pdf
What's your opinion about this ponyprog software?
What other schematic do you recomend me for working with mplab (i don't need a professional programmer yet) .

nbcd · 1st October 2004, 09:42 AM

how do i connect those schematics to the computer?

alfsch · 1st October 2004, 09:55 AM

I used pony 2 years ago, no probs.
see the schem...left upper is the rs232(PC) to 10pin interface, then sel which cpu to program and build 10pin to cpu interface, thats it.

guido · 1st October 2004, 09:56 AM

CON10 on the baseboard on top left connects to pic adapter on the bottom right. Or to any other adapter if you want to program something else. If you are only interested in programming the 16f84, this is too much effort.

Search on the net, there are plenty of small programmers and software out there. E.g. PicProg, LudiPipo.

One thing i found was that i had to shorten the xtal of the pic during programming. So include a jumper over the xtal and shorten it when you program 'in circuit'.

nbcd · 1st October 2004, 10:29 AM

thanks v much

nbcd · 1st October 2004, 10:38 AM

quido: what soft are you using for picprog schematic , is the same ponyprog or anoter , i' a bit confused
Thanks

guido · 1st October 2004, 10:53 AM

Hi,

Using PicProg from Tord Andersson.

Regards,

1st October 2004, 09:39 AM	#1
nbcd diyAudio Member Join Date: Apr 2003 Location: suceava	ponyprog hy all, I have some problems with the pic 16f84.Let's say these are only documentation problems.I dont find out what's the point with the CON 10 connector from here: http://www.lancos.com/e2p/si-prog-v2_2.pdf What's your opinion about this ponyprog software? What other schematic do you recomend me for working with mplab (i don't need a professional programmer yet) . __________________ eugen

1st October 2004, 09:42 AM	#2
nbcd diyAudio Member Join Date: Apr 2003 Location: suceava	how do i connect those schematics to the computer? __________________ eugen

1st October 2004, 09:56 AM	#4
guido diyAudio Member Join Date: Mar 2002 Location: diepe zuiden	CON10 on the baseboard on top left connects to pic adapter on the bottom right. Or to any other adapter if you want to program something else. If you are only interested in programming the 16f84, this is too much effort. Search on the net, there are plenty of small programmers and software out there. E.g. PicProg, LudiPipo. One thing i found was that i had to shorten the xtal of the pic during programming. So include a jumper over the xtal and shorten it when you program 'in circuit'. __________________ GuidoB

1st October 2004, 10:29 AM	#5
nbcd diyAudio Member Join Date: Apr 2003 Location: suceava	thanks v much __________________ eugen

1st October 2004, 10:38 AM	#6
nbcd diyAudio Member Join Date: Apr 2003 Location: suceava	quido: what soft are you using for picprog schematic , is the same ponyprog or anoter , i' a bit confused Thanks __________________ eugen


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st October 2004, 09:55 AM	#3
alfsch diyAudio Member Join Date: Jan 2002 Location: augsburg	I used pony 2 years ago, no probs. see the schem...left upper is the rs232(PC) to 10pin interface, then sel which cpu to program and build 10pin to cpu interface, thats it.

1st October 2004, 10:53 AM	#7
guido diyAudio Member Join Date: Mar 2002 Location: diepe zuiden	Hi, Using PicProg from Tord Andersson. Regards, __________________ GuidoB

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read