diyAudio (
-   Digital Source (
-   -   TDA1541 help please (

Igla 30th September 2004 11:15 AM

TDA1541 help please
Hy there !
I hate to start a new thread but I would need some help
about TDA1541 DAC.
I've decide to build a simple non-os no reclocked DAC with
a chip I could see without a microskope...and I 've found
one on Fedde site - the NONOZ DAC with TDA1543.Simple and beautifull and apparently good sounding.
But here is my problem:
-The local store where I suppose to buy TDA1543 don't have
them anymore...they only have TDA1541 and TDA1541A.
Is there a simple non-os DAC schematic with TDA1541(A)...I mean
without reclocking.I found only the reclocked non-os version of
TDA1541 DAC ?
-The other problem is the receiver CS8412 - I can't find it...
at least in the stores around here.
Are there any other receivers (containing quartz if possible),I could use it with TDA1541 ?
Any help would be highly appreciated.

Bricolo 30th September 2004 05:00 PM

Here's a well done DAC, non os and without reclocking
the 8412 may be hard to find and expensive (approx 15), if you want use the 8414, mostly the same in smd format

Igla 30th September 2004 06:30 PM

Thanks a lot Bricolo;this is exactly the schematics I
would like to implement...simple non-os DAC without reclocking.
I went for TDA1541 just because they are on stock in my local store and TDA1543 is out of stock.Othervise I would rather
try the NONOZ DAC.
The problem is still CS8412 or CS8414.I can't get them arround
here and I think I will be forced to use crystal and some other
receiver more easy to find.

Any suggestions which "easy to find " receiver and cryistal
to use ?


All times are GMT. The time now is 06:53 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio