Replacement for CDM 12.1

Sandor · 18th September 2004, 11:33 AM

What kind of transport mechanism can I use as a direct replacement of the CDM 12.1 used in my Marantz CD63?
Is there a way to fit a CD-PRO2M in the CD63?
Best regards.

Paul

dominik2410 · 7th May 2005, 03:31 AM

Hello Sandor!

The replacement for the cdm 12.1 is called VAM 1202!

Regarding your second question I don't know!

Regards

Dominik

mvollb · 7th May 2005, 06:30 PM

Hi,

from my point of view there are more and better possibilities to use a cdmpro2... check the thread here on "digital" some weeks ago...

But anyway - how do you think the cdmpro will fit into the L1210 loading device?

http://www.daisy-laser.com/products/...ro2/cdpro2.htm

cheers
Michael

ash_dac · 8th May 2005, 09:50 AM

Hi,

I recently picked up a cdpro cheap with the intention of swapping it into Philips cd723 with cdm12.1 .

However, the mechanisms cannot be interchanged easily due to the use of different protocols:-

http://www.diyaudio.com/forums/showt...253#post470253

Cdm12.1 can be improved!

(Separate, and improved power supplies aswell as replacement microcontroller )

Lots of commercial, and diy examples out there!

http://www.hifichoice.co.uk/archive/...rintreview.htm

http://www.hifiplus.com/t-rev2-6.html

http://www.avland.co.uk/marantz/cd14/

Kind regards,

Ashley.

tiefbassuebertr · 08:04 PM

Quote:

Originally Posted by dominik2410

Hello Sandor!
The replacement for the cdm 12.1 is called VAM 1202!
Regards Dominik

Differences are in the clamper force from the magnet of turntable (disc motor pulley) - see attachement. Same variation is between CDM12.1 and VAM1202

18th September 2004, 11:33 AM	#1
Sandor diyAudio Member Join Date: Mar 2004 Location: Milan	Replacement for CDM 12.1 What kind of transport mechanism can I use as a direct replacement of the CDM 12.1 used in my Marantz CD63? Is there a way to fit a CD-PRO2M in the CD63? Best regards. Paul

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacement LED	DreadPirate	Parts	11	14th November 2009 04:45 PM
Replacement amp for A-Bus?	Greg911	Class D	0	16th November 2008 02:33 PM
MTX 5 ch pot replacement	pk386	Parts	2	1st October 2006 04:32 AM
replacement cap for T-amp: How big?	MEXXX	Class D	5	10th December 2004 12:30 PM
Replacement for 5R4	Ralph	Tubes / Valves	8	16th December 2003 10:02 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th May 2005, 03:31 AM	#2
dominik2410 diyAudio Member Join Date: May 2005 Location: Vienna	Hello Sandor! The replacement for the cdm 12.1 is called VAM 1202! Regarding your second question I don't know! Regards Dominik

7th May 2005, 06:30 PM	#3
mvollb diyAudio Member Join Date: Mar 2005 Location: Cologne	Hi, from my point of view there are more and better possibilities to use a cdmpro2... check the thread here on "digital" some weeks ago... But anyway - how do you think the cdmpro will fit into the L1210 loading device? http://www.daisy-laser.com/products/...ro2/cdpro2.htm cheers Michael

8th May 2005, 09:50 AM	#4
ash_dac diyAudio Member Join Date: Jan 2005 Location: UK	Hi, I recently picked up a cdpro cheap with the intention of swapping it into Philips cd723 with cdm12.1 . However, the mechanisms cannot be interchanged easily due to the use of different protocols:- http://www.diyaudio.com/forums/showt...253#post470253 Cdm12.1 can be improved! (Separate, and improved power supplies aswell as replacement microcontroller ) Lots of commercial, and diy examples out there! http://www.hifichoice.co.uk/archive/...rintreview.htm http://www.hifiplus.com/t-rev2-6.html http://www.avland.co.uk/marantz/cd14/ Kind regards, Ashley.