diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   CDM1 or CDM1 MK2 In Revox B226S (http://www.diyaudio.com/forums/digital-source/40923-cdm1-cdm1-mk2-revox-b226s.html)

jchou 14th September 2004 04:43 PM

CDM1 or CDM1 MK2 In Revox B226S
 
Dear menbers:
Is there any one could give me input about what transport (CDM1 or CDM1MK2) was used in REVOX B226S.
I saw the schmatic about the laser output power adj resister the value is 4.7K, but in studer 727 or marantz cd95 used 1K pot??
:confused:

Thanks a lot for any help.
Jason Chou

zygibajt 14th September 2004 09:37 PM

Revox B 226 uses CDM 1 - 100% sure
Studer 727 used CDM 2 - 90% sure

Don't know about CD 95
CD 94MKII used CDM 1 too but CD 95 was a bit diffrent line.

I think Revox srvice manuals are somewhere in the internet,they should also help.

Bartek

TDA1540 14th September 2004 10:02 PM

2 Attachment(s)
and a picture!

TDA1540 14th September 2004 11:01 PM

And a manual!



http://www.schori.info/timelimited/d...B226S-d-ok.zip

guido 14th September 2004 11:07 PM

A picture of what ??? cdm1 'version CD85' ??
Looks like a cdm1 transport with different pcb around it.

Downloading the manual, thanks!

Regards,

guido 14th September 2004 11:25 PM

Quote:

Originally posted by TDA1540
And a manual!



http://www.schori.info/timelimited/d...B226S-d-ok.zip

Hi,

Got it downloaded, but winzip complains it is not a valid archive
:xeye: :xeye: Could you have a look at it?

mmm, looking at the name of the pic, it must be from the 226.
doesnt look like my cdx cdm1... another version i guess:cannotbe:

TDA1540 14th September 2004 11:45 PM

Quote:

Got it downloaded, but winzip complains it is not a valid archive
I had no problems.I can mail you my download if the problem persists.

Quote:

mmm, looking at the name of the pic, it must be from the 226.
hmm,could be a wrong picture.The manual depicts a different setup.

Lourens 16th September 2004 08:54 AM

2 Attachment(s)
Quote:

Originally posted by zygibajt
Studer 727 used CDM 2 - 90% sure
No. Revox B226, Studer A725 and A727 all use the same CDM1 - 100% sure.

Quote:

Originally posted by guido
[BA picture of what ??? cdm1 'version CD85' ??
Looks like a cdm1 transport with different pcb around it.
It's pretty much identical to the one in my A727. Also used in Revox B226, as you can see on the attached clip from the service manual.

groeten,
Lourens


All times are GMT. The time now is 08:40 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2