Hi,
To provide balanced aes3 signal to active digital speakers, I need to split the signal from one transmitter to three receivers.
The signal is balanced from a transformer and sent over shielded twisted pair as transmission line.
At the receiver side I need a divider, preferably not another transformer, that keeps the load impedance at 110 Ohm and signal levels at their original sended values.
Is some sort of discrete buffer an idea?
Thanks, Frank
To provide balanced aes3 signal to active digital speakers, I need to split the signal from one transmitter to three receivers.
The signal is balanced from a transformer and sent over shielded twisted pair as transmission line.
At the receiver side I need a divider, preferably not another transformer, that keeps the load impedance at 110 Ohm and signal levels at their original sended values.
Is some sort of discrete buffer an idea?
Thanks, Frank
In the video industry we used Video Distribution Amplifier (high bandwidth) to distribute AES-3 signal.
Since most of the patch, cabling and distribution equipment are based on 75 Ohms, that simplify the installation compare to a 110 Ohms installation that necessitate 110 ohms cabling and XLR connector.
Since most of the patch, cabling and distribution equipment are based on 75 Ohms, that simplify the installation compare to a 110 Ohms installation that necessitate 110 ohms cabling and XLR connector.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.