ADC for home studio

jordani · 20th June 2004, 05:10 AM

Well this is my first post, and I hope to get some interest. I would like to develop an analog to dgital converter as one of the elements of a home recording studio system. I was able to find one other post, however it seemed to be going nowhere, and I was not able to find again later(not exactly sure what that's all about.)

I am interested in developing this device to use the Texas Instruments PCM1802 ADC and using a Crystal 192KHz transciever to support an optical interface to my PC. I believe this is achievable without too much headache, but as I am new to the digital audio design world, I would like to know if anyone is interested in collaborating on this project.

My overall goal is to eventually develop a full fledged home studio with rack mounted reverb, compression, and other effects. All of this being controlled via USB, and connecting to the PC with optical cables. This ADC will be the first building block, and by basing it around a DAI transceiver it will also be expandable to provide the DAC that will be required for the overall loop that will be built.

If anyone is interested in this topic, I would love to hear any suggestions.

rfbrw · 20th June 2004, 03:37 PM

Do a search of the forum and you will find this topic has come within the last two weeks or so. You could contact the thread starter and collaborate.

20th June 2004, 05:10 AM	#1
jordani diyAudio Member Join Date: Jun 2004 Location: Canada	ADC for home studio Well this is my first post, and I hope to get some interest. I would like to develop an analog to dgital converter as one of the elements of a home recording studio system. I was able to find one other post, however it seemed to be going nowhere, and I was not able to find again later(not exactly sure what that's all about.) I am interested in developing this device to use the Texas Instruments PCM1802 ADC and using a Crystal 192KHz transciever to support an optical interface to my PC. I believe this is achievable without too much headache, but as I am new to the digital audio design world, I would like to know if anyone is interested in collaborating on this project. My overall goal is to eventually develop a full fledged home studio with rack mounted reverb, compression, and other effects. All of this being controlled via USB, and connecting to the PC with optical cables. This ADC will be the first building block, and by basing it around a DAI transceiver it will also be expandable to provide the DAC that will be required for the overall loop that will be built. If anyone is interested in this topic, I would love to hear any suggestions.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5ch headphone amp for home studio	digi01	Headphone Systems	3	20th July 2009 09:48 AM
Custom Home Theater Project in New Home, Opinions appreciated.	thadman	Multi-Way	5	20th November 2008 12:40 AM
Help me with my studio please !!!	hectik	Subwoofers	1	28th March 2005 09:23 AM
Home home or pop pop noise from sub	ricky fong	Multi-Way	0	26th February 2003 01:15 AM
monitors for home studio?	GAK	Multi-Way	6	10th January 2002 03:49 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th June 2004, 03:37 PM	#2
rfbrw diyAudio Member Join Date: Oct 2001 Location: .	Do a search of the forum and you will find this topic has come within the last two weeks or so. You could contact the thread starter and collaborate.