|Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|9th July 2016, 01:24 PM||#1|
Join Date: Jul 2016
Philips CD-450 CDM2/10 issues
Have a Philips CD-450 with CDM 2/10 with strange issues.
One is when the tray is open the motor tray doesn't stop. If i push the tray back a little it's stops. Checked the switches everything OK.
Second one the swing arm doesn't move at all.
Checked with service steps.
Service mod 0 - stand-by OK.
service mod 1 - focus OK.
service mod 3 - not OK. That means it doesn't goes to the service mod 3, goes directly to service mode 0.
On service mod 0 and 1 the swing arm should move if the search buttons are pushed. Doesn't move at all.
Seems it something on the radial tracking circuit.
Checked voltages, cold solders , cables, replaced all caps ( the well known issue), checked the power supply and nothing.
The laser is working, the focus is working disc is spinning.
Checked the connections between servo and laser mechanism , other well known issue , nothing wrong.
So, any clue anyone?
I think I'm isolated the problem.
Seems it is a problem with the turntable motor.
Checked all voltages and in the Stop mode on pin 5 of the op-amp MC1458 the voltage is wrong. Needs to be 0V but measured 2.2V.
The op-amp is changed with new one because I suspected a problem with it , but the same problem.
Last edited by sandmanhuck; 23rd July 2016 at 08:15 AM. Reason: Update
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Philips laserunits CDM2/10 CDM4/19 CDM4/11 CDM4||Joris||Swap Meet||1||31st May 2013 07:19 PM|
|Philips cd160 CDM2 replacement to CDM1||orsmate||Digital Source||2||31st January 2013 03:45 PM|
|CDM2/10 Behaving Badly||Dave S||Digital Source||71||26th May 2010 11:52 AM|
|Philips CDM1 MKII = CDM2??||FC5687||Digital Source||2||4th July 2007 12:32 PM|
|CDM2/10 replacement||DeepBass909||Digital Source||2||10th November 2003 01:30 AM|
|New To Site?||Need Help?|