Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

HK signature 2.0 pre a No digital anything
HK signature 2.0 pre a No digital anything
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th January 2004, 10:04 PM   #1
AVWERK is offline AVWERK  United States
diyAudio Member
AVWERK's Avatar
Join Date: Jan 2004
Location: So Calif.
Default HK signature 2.0 pre a No digital anything

This my first post in this fantastic arena so the question is:

No blown fuses and everything works except the digital section
I have power to the board in question but cannot get a response from either the display or output.
I have version 2.8
Should the digital optical input be lit like it is on a dvd player? It's not, if that helps
It's a complicated piece to set up and wonder if a button stroke is all that's needed- I have gone over the manual completely and feel confident somethings amiss.
It has the later chip (not motorola) i think from memory (crystal something?) on the digital board
I'm using a HK non standard remote programed for it if that makes a difference
Months back I contacted www.rjpc.com and they have the older motorola chips but would like to keep the later if it can be used at all.

If any of you have an original remote or know anything about this pre amp/processor or a direction to go it would be much appreciated.


  Reply With Quote


HK signature 2.0 pre a No digital anythingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LAMM ML3 *Signature* serengetiplains Tubes / Valves 51 9th December 2009 08:22 PM

New To Site? Need Help?

All times are GMT. The time now is 07:41 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio