Pioneer DV-717 draw opening & closing - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th June 2014, 01:04 PM   #1
diyAudio Member
 
Join Date: Jan 2008
Location: East Sussex
Default Pioneer DV-717 draw opening & closing

Hi does anyone have any thoughts or advice on my Pioner DV717 DVD player?
It reads and plays DVDS and CDs fine. However the draw closes automatically straight away on opening making it difficult to get the disk in.
Thanks in advance
Lee


Sent from my iPhone using Tapatalk
  Reply With Quote
Old 7th June 2014, 01:22 PM   #2
Mooly is online now Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Most likely cause would be problems with any micro switches used to detect tray in/out.

Similar issue on a CD player. The pictures in post #1 show the problem. The switches could take this form or be much much smaller.

Sony CDP790 and KSS240 Restoration Project
__________________
-------------------------------------------------------
A simulation free zone. Design it, build it, test it.
  Reply With Quote
Old 7th June 2014, 02:49 PM   #3
diyAudio Member
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
Send a message via Skype™ to JonSnell Electronic
If the door timing has moved, (forced) it will not complete opening correctly and close instantly. Possibly one tooth has shifted.
__________________
www.flyingmole.co.uk For World Wide support for Flying Mole, Class D, Refurbishment and Repairs. www.jonsnell.co.uk
  Reply With Quote
Old 7th June 2014, 07:48 PM   #4
diyAudio Member
 
Join Date: Oct 2006
Here is how to fix the tray problem on your DV717:
First, remove the plate that holds the upper disc clamper, which will be 2, 1 or no screws + a couple of plastic snaps.
Unload the tray(either powered up or by manually turning white gear bottom left front side of mech), then, powered off, pull the tray out of unit completely, but slowly.
Near front of mech, where tray was, to left(or maybe right), you will see a blue lever shaft sticking up. This is the tray sensing switch. You'll see that the shaft is attached to a miniature rotary switch. Drip a good contact cleaner/lub(Triflow is the best) onto the switch, trying to aim it into the tiny gap between blue rotating and black fixed part. Then, manually flip the switch forward & back very rapidly, many, many, many times(like 30-50).
Line up tray into mech & slide slowly back, but first, observe that there is a black plastic projection on a slide plate that must align with a track on bottom side of tray. If you didn't touch it, should be in right position, but check it. If in right place, the loading mech will complete the loading cycle as normal as soon as you power up.
Re-install clamper plate.
Test loading.
Finished.
  Reply With Quote
Old 8th June 2014, 05:38 PM   #5
diyAudio Member
 
Join Date: Jan 2008
Location: East Sussex
thanks verry much I will try and fix it tomorrow

Sent from my CUBE U9GT 2 using Tapatalk
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Arcam CD192 CD draw not opening jeby Digital Source 4 21st December 2012 06:32 AM
Pioneer DV 717 Service Manual Puffin Digital Source 0 7th March 2012 07:31 PM
Phillips CDM9 Pro opening/closing gear delapoer Digital Source 13 19th December 2006 09:26 AM
Pioneer DV-717 tunning bra Digital Source 9 18th April 2006 07:09 PM
Pioneer DV-656a or DV-655a user manual/schematic kenlow Digital Source 0 27th January 2004 08:36 AM


New To Site? Need Help?

All times are GMT. The time now is 07:38 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2