TDA1541 idea

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi,

sombody experience with this idea?

i have a marantz cd80 and a sowther 8347 output transfomer.

the marantz has a alps motorpoti inside with 10kohms.

My idea now ist to use the poti on the secondary as variable i/V resistor and then i have a remote controlled output with the poti not in the direct signal path.

the recommended 25 ohms i/V on the primary corresponds to roughly 8 kOhms on the secondary.

any con´s?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.