diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   Digital FR Measurements (http://www.diyaudio.com/forums/digital-source/22742-digital-fr-measurements.html)

Rarkov 14th November 2003 11:54 PM

Digital FR Measurements
 
Hi,
I am finally doing my dissetation for Uni. The subject is the measurement of frequency response from a standalone unit. It is limited to audio circuits and after calculating the FR it sends the results as a standard text file via RS232 to hyperterminal in the format:

frequency value

Anyway - up until today, I've been looking at strictly analogue methods:

PIC->VCO->Device Under Test->RMS2DC->ADC->PIC->RS232

but someone mentioned that I could use an impulse and convert the output from the device using FFT to retrieve the FR. Apparently this is a DSP trick called Dirac or something. Anyway - I'm looking at using the dsPIC range of products.

Can anyone give me any information about a digital method of FR measurement (NOT COMPUTERS PLZ!!!)

Thanks,
Gaz

till 14th November 2003 11:59 PM

use some signal like this instead of sine? http://www.ph.ed.ac.uk/~jonathan/thesis/node82.html


All times are GMT. The time now is 03:50 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2