|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc. |
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Feb 2011
|
Super I/v revised
-24khz low pass filter(Qfactor=2.4) decoupling caps and XLR of course -the design allready been tested very good sound high wattage resistors -----where needed reduce noise and increase quality -no more pop ups -at the @cross point@ can be set low when no audio on DAC using simple NPN with collector to ground Recommend tweaks and improvements dont increase gain more than 5 times ,better having the first feedback resistor higher Last edited by xslavic; 23rd December 2012 at 02:13 PM. |
|
|
|
#2 |
|
diyAudio Member
Join Date: Oct 2006
|
What is super about this? It looks virtually identical to datasheet bog standard, except for the very strangely chosen & I would say ill-advised (un-spec'd)electrolytic accross the inputs.
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Feb 2011
|
owh really,so if no Jfet at the input of two parallel resistor its not super
youre confusing Wxotic with super or 80db with 140 |
|
|
|
#4 |
|
diyAudio Member
Join Date: Feb 2011
|
do not use other Cap values except for the 220pf marked in the drawing
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Active variable Low-Pass Filter 55-110 Hz | MrDragon1 | Analog Line Level | 9 | 27th September 2011 01:19 PM |
| DIY One fader mixer with Filter Low Pass, Hi Pass, Notch Pass Filter PGM | stevep314 | Analog Line Level | 0 | 10th August 2010 09:15 PM |
| Ultimate Active Low Pass Filter | toshiba_nz | Analog Line Level | 0 | 26th May 2010 07:25 AM |
| high gain 2nd order high pass active filter topology | sreten | Solid State | 21 | 23rd March 2006 01:26 AM |
| Low value IV resister followed with high gain amp stage?[tda1543] | setmenu | Digital Source | 10 | 27th September 2004 01:14 PM |
| New To Site? | Need Help? |