VAC dac tubes

inertial · 04:44 AM

hi all,

Is it the output of the dac modules in current or in tension? what dac are employed? analog devices maybe?
it it the I/V conversion by transistor or resistor or transformer, etc?
thanks for reading
cheers
Paolo

DF96 · 5th December 2012, 09:25 AM

You ask four questions. The answers are: either (or both), any, yes, yes.

I suspect you find this unhelpful, but your questions were too vague to be helpful.

5th December 2012, 04:41 AM	#1
inertial diyAudio Member Join Date: Aug 2004 Location: Italy	VAC dac tubes hi all, Is it the output of the dac modules in current or in tension? what dac are employed? analog devices maybe? it it the I/V conversion by transistor or resistor or transformer, etc? thanks for reading cheers Paolo Last edited by inertial; 5th December 2012 at 04:44 AM. Reason: error

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SMPS 230 VAC to 115 VAC 800W	TeeJay	Power Supplies	88	22nd September 2011 07:30 PM
Sola Transformer 95-130 VAC In 118 VAC Out 60 VA 60 HZ	Scott Novak	Swap Meet	1	18th April 2009 10:24 AM
help 124.3 vac	dognut	Tubes / Valves	5	1st March 2009 02:12 AM
Convert 230 VAC amp to 120 VAC??	chuck55	Solid State	8	7th February 2006 01:22 PM
Tubes for Scott Nixon dac	icebear	Tubes / Valves	0	20th January 2005 11:39 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th December 2012, 09:25 AM	#2
DF96 diyAudio Member Join Date: May 2007	You ask four questions. The answers are: either (or both), any, yes, yes. I suspect you find this unhelpful, but your questions were too vague to be helpful.