S.houBed DAC 132db Dual MONO pcm1794

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
The resistor above gives the oversampling multiplier,however you can make it a NOS DAC or NON oversampling dac by connecting the pcm1794 's SCK and BCK it can produce a non audible delay between channells butsound is better and can be corrected increasing one of the 2 resistors to BCK (sck ones shoud be removed)
 
another way of connecting pcm1794

just dont connect sck and bck if you want no delay
 

Attachments

  • Immagine.jpg
    Immagine.jpg
    67.5 KB · Views: 354
New boards on the way
V1.1 cs8421 wm8805 pcm1794 ,smaller pcb,better circuit,RED colour pcb
TPA6120 or TPA6120A2 headphone amplifier,improved dynamic range by decreasing load on I/V opamp, SMD HPF decoupling cap at the out of pcm1794-rest all hole mount components,leds for every stage of the DAC ,multiple connectivity options + analog switches
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.