diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   I2s Usage With DIY DACs (http://www.diyaudio.com/forums/digital-source/217469-i2s-usage-diy-dacs.html)

bcmbob 6th August 2012 07:57 PM

I2s Usage With DIY DACs
 
In addition to my own curiosity, I have received several questions dealing with the use and benefits of hard wiring I2S to chips on various DAC designs. I don't have those answers, so this thread is intended as a catch-all for reporting successful implementations including photos, diagrams and dialog.

There are of course discrete retail solutions for this which may be a better/safer approach. That information would also be welcomed in helping DAC builders make the correct decision on which path to take.

My experience has been with the Mini2496 design, so I will start by requesting someone who has had some success with I2S and the MIni to start the ball rolling. Implementation on any other DAC design, to get the thread going, is equally welcomed.

The floor is open.....

bcmbob 7th August 2012 08:49 AM

A couple references:

http://www.diyaudio.com/forums/digit...ml#post2976807

Teleporter Digital Transfer Module

Sergelisses 7th August 2012 09:42 AM

1 Attachment(s)
A few months ago i experimented this solution .

You can see in the document some details . :spin::Popworm:

Serge

grmgrmgrm 7th August 2012 05:11 PM

ok, here is some clearification of connecting AK4396 and teralink x2:

BB DAC - AK4396 - Stranica 7 - Digital - diyaudio.rs

thanks to bcmbob and sterlingmck for this..


All times are GMT. The time now is 12:34 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2