QUAD 67 CD player&66 pre

ClassA · 14th June 2012, 01:20 PM

Hi,
Can I modify quad 67 cd player&66 pre input voltage from 220V to 110V by just re-wiring the internal circuit?

Regards,

Mooly · 15th June 2012, 06:48 AM

That depends on the options available on the transformer. Detailed clear photos of the transformer primary windings might help as would a service manual.

sebastian_s · 15th June 2012, 06:55 AM

Have a look at http://www.meridian-audio.info/publi...%5B3128%5D.pdf
The service manual describes what needs to be done to wire for 110V.

Have fun with these Hifi classics!

Sebastian

ClassA · 15th June 2012, 02:16 PM

Thank you! This is a valuable information.

Su

haik · 22nd June 2012, 09:17 AM

Or worst case, if you do not want to open the case, use a 110 to 220V external transformer. It should be possible to obtain it at a good electronics or hardware store.

14th June 2012, 01:20 PM	#1
ClassA diyAudio Member Join Date: Nov 2005 Location: Taiwan	QUAD 67 CD player&66 pre Hi, Can I modify quad 67 cd player&66 pre input voltage from 220V to 110V by just re-wiring the internal circuit? Regards,

15th June 2012, 06:48 AM	#2
Mooly diyAudio Moderator Join Date: Sep 2007	That depends on the options available on the transformer. Detailed clear photos of the transformer primary windings might help as would a service manual. __________________ ------------------------------------------------------- *A simulation free zone.* *Design it, build it, test it.*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Peerless 830452 New Boxed Quad 66 Pre amp	ANTHONY2181	Swap Meet	6	11th March 2010 08:07 AM
Quad 66 pre amp output	affordablehifi	Solid State	2	16th February 2005 09:39 PM
Quad 67 CD clock upgrade?	Zombie	Digital Source	4	18th October 2004 09:59 AM
Quad 67 CD Player	405man	Everything Else	1	14th July 2004 06:38 PM
QUAD CD-67 schematic	yves	Digital Source	2	2nd October 2003 09:00 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

15th June 2012, 06:55 AM	#3
sebastian_s diyAudio Member Join Date: Sep 2006	Have a look at http://www.meridian-audio.info/publi...%5B3128%5D.pdf The service manual describes what needs to be done to wire for 110V. Have fun with these Hifi classics! Sebastian

15th June 2012, 02:16 PM	#4
ClassA diyAudio Member Join Date: Nov 2005 Location: Taiwan	Thank you! This is a valuable information. Su

22nd June 2012, 09:17 AM	#5
haik diyAudio Member Join Date: Mar 2012	Or worst case, if you do not want to open the case, use a 110 to 220V external transformer. It should be possible to obtain it at a good electronics or hardware store.