Servo PCB for L1210/65 (CDM12.1/VAM1202) from Daisy -where in use by Marantz (Schema)
I need a schematic for the Servo/Decoder PCB, which is in use in the loader L1210/65 from Daisylaser (for mechanism CDM12.1, VAM1201 and VAM1202) - go to
Daisy call this PCB as follow:
"New CD7 II (SAA7327) servo-decoder for improved playability and reliability"
I read follow numberings on the PCB from Daisy (have a look to the PDF images):
there are additional informations, mostly unfortunately in french language.
are to find the predecessor of this servo boards at a CD722 from Philips (scroll down).
There was produced several top class cd player in very small amount, where this PCB is in use. AVI (lab Series), RESTEK (Mini Pla), Northstar and various models from Micromega are examples.
Here some links of such brands:
SoundStage! Equipment Review - North Star Design Sapphire CD Player (2/2008)
Audiophile Corner - CD Integrated Players
Unfortunately this PCB isn't in use in Philips/Marantz CD Players like CD710, CD722, CD63 or CD67. Thus the service manuals are not helpful.
Who knows brands, which have produced cd player in large amount where this servo board is inside (like Marantz) ??
Such brands must actually publish the schematics (in opposite to DaisyLaser).
Thank you very much for advices
Hello, yes - this is the servo-board used in the AVI lab series CD-Player ... here are 2 better pics - the green side is modified by AVI.
I am tearing my hair out trying to identify transistors T905/904/906 & 907 on this PCB. It is out of a Cyrus CD6 CD player. Also require a schematic. Can anyone help me? There is no DC on the tray motor when given the open/close command.
check out this thread and send a PM to the starter - perhaps he can help.
Experten für Reparatur CD-Player gesucht ... - Verstärker, Lautsprecher, Zubehör - Analog-Forum
Thank you for this helpfull information. My friend who owns the Cyrus CD6 player has decided to send it to the service agents in Sydney (Aus). So that's one more problem I don't have to worry about. But your helpfull info was much appreciated.
Hi all, who can help me?
I have a CD player using 1) HECD-019A 2) DN24A533 is spoilt.
Where can I buy it? I contacted Daisy, but no reply.
Your help is appreciated.
N-tronics GmbH is a creative, independent, global stocking distributor of semiconductors, located in Germany (Europe): Our absolute goal is to offer all obsolete semiconductors and other hard-to-find parts. Brands: Actel, ALPS, AMD, Analog Devices, A
I'm looking for a circuit of the HECD -019A servo board. Its used by Cyrus in their CD6 and CD8 series CD players.
I have tried Cyrus who wont help.
Daisy , got no reply
tried all the links in this thread.
Did anyone have any sucess in getting a circuit ?
The actually question is an other:
In which Philips/Marantz models (both CD Players , burners, ghetto blasters and Hifi systems) the same boards are in use?
If I know this, it is easy to get schematics and service manuals.
Maybe Cyrus and AVI know this - try to call and ask this question. My english is too bad for a call by phone.
|All times are GMT. The time now is 07:43 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio