diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   Extract audio signal from PCM1792 ! (http://www.diyaudio.com/forums/digital-source/211371-extract-audio-signal-pcm1792.html)

vmed_cha_gr 23rd April 2012 08:13 AM

Extract audio signal from PCM1792 !
 
2 Attachment(s)
Dear Members
I have an Original Electronics CD-2008F (cd player) that uses the good Burr Brown PCM1792. I want to extract the audio signal and use it on a tube circuit based on 6dj8 tubes, like those Mr Lampizator is using.
I want to avoid listening to music from 6 opamps that this cd player uses on its output & actually experiment with the tube like sound.
Does anyone know from which pins you get the audio signal from the PCM1792 chip ?
Look at the chip pinout bellow.
Thanks
Vassilis

analog_sa 23rd April 2012 09:03 AM

Off the top of my head i would give the pins labelled "out" a try :)

You still need something for I/V duties and obviously you would want it differential...

Not sure how well passive I/V works with the 1792.


All times are GMT. The time now is 02:19 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2