Help with Pioneer PD5165A - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 22nd February 2012, 08:13 AM   #1
diyAudio Member
 
Join Date: Feb 2012
Default Help with Pioneer PD5165A

Pioneer A-450R use this C.I. , an i belive is broken because the mute and st-by systems are not working. I don't have remote to check if it's working.Please tell me with what oem ci i can replace this , or from where to buy this ci.You have a schematic from service manual, but not enought volt points to check, so if you have special way to control this ci please tell me. Thank you !!!!
Attached Images
File Type: jpg PD5165A.jpg (823.4 KB, 42 views)
  Reply With Quote
Old 23rd February 2012, 02:04 AM   #2
diyAudio Member
 
Join Date: Oct 2006
You will not find any substitute for the original chip, as it is a custom hardware programmed cpu, as most syscon processors are. However, it is very unlikely that it is bad. Look for defects outside of the chip, in the peripheral components.
  Reply With Quote
Old 23rd February 2012, 12:17 PM   #3
diyAudio Member
 
Join Date: Feb 2012
I check all the volts from schematics and i found that :
pin 1-5,1v like schematic
pin23-0,45v (here i have 2 values in schematic 4,7v/0,45v)
pin26-1,18v (2 values 4,0v/1,0v)
pin28-4,8V (2 values 5,0v/0,0v)
All this volts exist when the amplifier it's working .
  Reply With Quote
Old 23rd February 2012, 03:54 PM   #4
diyAudio Member
 
Join Date: Feb 2012
All this volts exist when the amplifier it's working in tests, because stand-by and mute doesn't work.
  Reply With Quote
Old 24th February 2012, 01:04 AM   #5
diyAudio Member
 
Join Date: Oct 2006
Those are all normal readings, going by when the dual voltages should be one or the other, by function of attached circuitry. You should see if you get a voltage change on 37 when you press power button and on 3 when you press mute button.
  Reply With Quote
Old 17th April 2012, 02:58 PM   #6
diyAudio Member
 
Join Date: Feb 2012
PD5165A is broken and i replaced. Now its working perfect!!!
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 12:51 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2