Look at the CD473 r30 schematic for receiving the RC5 signals. MAB 8441 P/T146 and MC6805 L8.
Philips is known to programm differently their CPU and the last letters of the CPU signal the "firmware" included. So, if your numbers are different, you might not have RC5 decoding programmed in.
Philips is known to programm differently their CPU and the last letters of the CPU signal the "firmware" included. So, if your numbers are different, you might not have RC5 decoding programmed in.
Attachments
Last edited:
The part number is DR102 (from Digital Receiver) and on both schematics is marked "1702", but now I see it in the listing as... " IR receiver BX1407; Philips part #4822 218 10212".
I would try any RC5 IR receiver.
I would try any RC5 IR receiver.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.