DAC Hifidiy Olympic PCM1798 assembly and problem
Hi, from Argentina, i speak english not very well, im sorry :rolleyes:
I have bought a Kit - DAC Hifidiy PCM1798 olympic version -
Someone has tried this kit ?
the kit comes with manual very synthesized
I dont understand a transformer volts,
i have connected to 220v : >>
when i connect to 220V, a Transformer make noise, a tube lights but... strong light... in 10 seconds a fuse cute and transformer burn,,smoke mell :eek:
Hifidiy say: " yes , it can work with 220V , the transformer is from 110 to 220V , I think may be you can check the attachment about the connection , may be you made a mistake , connect the wrong line , please check , anything can contact me, "
The DAC worked 10 seconds ,, but then see smoke.
The connection transformers its ok ?
Thank you and im sorry. I have another picture large.
You need to connect BOTH of the 115V in SERIES WITH PROPER POLARITY. They have a "beginning" and an "end".
The way you connected the transformer damaged it - you applied 220V on just one 115V coil!
And you did solder in short-circuit the second coil - that is even worse for the transformer!!!
Connection should be something like RED - BLACk on 220V and BLUE - GREEN toghether. Altough, I am not sure if that's the proper polarity, it could be RED-GREEN to 220V and BLUE-BLACK toghether.
Vendor SHOULD tell you the correct connection for 220V (one of the two above), because only him knows the way the windings are polarized.
Thank you Sonic!
please, could you draw me a pic please ? :D
you can try with paint. :D
im thinking about what to do now ? :confused:
a transformer burned...and a PCB components :scratch1::scratch1:
maybe burned many components ?
maybe i can try with another kit (without chassis) u$150 , transformer u$25
or i can send to China Manufacture my kits without chassis
for u$50 shipping and they can check my kit burned and then u$50+ for shipping return to argentina?
Components are probably all right... You can try buying another transformer from the same guys (with proper schematics how to connect). Or rewind (rebobinar) this one. I am sure you have shops that can do that there.
Could you post a better picture of the label on the transformer?
Windings are usually marked with a dot or something to show polarity.
From what I can see, blue and green should go to mains, and black and red soldered together.
Red + Black >>>> 220V
(Blue + greend solded)
According to the chinese label on the RCore:
P1 Red. -Blue
P2 Greed.- Black
Looks like you should connect Blue and Green together
the Red and Black connect to your main AC inlet.
Sorry, might have gotten it backwards.
I believe syklab is correct.
|All times are GMT. The time now is 12:53 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio