Parasound "C/DP 1000" (CDP1000 C/DP1000 CDP) CEC 2100 3100 Service Manual wanted

[tiefbassuebertr]

I am looking to a service manual of those associated CD Player model, where the here showed servo/pcm decoder PCB from Sanyo Optronics is in use:
???? - ????????????? ???????-??????, ?????????? ? ?????????? ? ???????.

Only schematic diagram of this PCB I have found by post #7 and #8 about
CEC TL51X CD Transport

There are a lot of other brands, where this PCB is in use. I have attached some pics and listed some examples by post #5 about
Yba cd2 delta, classe cdp .3, roksan caspian ... main board

The there mentioned models (Sharp CD S600X and CEC 780CD/880CD), from that I have found service manuals, are helpful, but not perfect. Therefore I want to have a service manual of those cd player device or hifi system, for which this PCB originally was developed and used. The following identifier numbers are to read:
1) on the PCB: "TK-T71 94V-O" and "4B10012700C"
2) on the associated schematic: Sanyo Optronics CO., LTD

My experience has shown, that there are more detailed adjustment and troubleshooting instructions.

Who know the associated model ?

[tiefbassuebertr]

Now I have found several important informations:
Fringe - May 1999
Thus the smallest model for this servo PCB with detailled adjustment instructions in the service manual is the CD-2100 (CD2100) from CEC.
for schematic and tweaking advices go to
https://sites.google.com/a/lvsystem....grage-cec-2100
https://sites.google.com/a/lvsystem....ka-master-klok
https://sites.google.com/a/lvsystem....izacia-pitania
https://sites.google.com/a/lvsystem....ovka-mehanizma
and to post #18 about
Yba cd2 delta, classe cdp .3, roksan caspian ... main board

[artegagt]

http://www.vegalab.ru/forum/attachme...6&d=1256423062

but without schematic

[tiefbassuebertr]

Originally Posted by artegagt

http://www.vegalab.ru/forum/attachme...6&d=1256423062

but without schematic

Thank you very much. This service manual is the right thing for Sanyo's PCB "4B10018600" used in additional models:
a. Yba CD-2 delta (image post #7+1)
b. Classe CDP-3 (image post #7+1) about
Yba cd2 delta, classe cdp .3, roksan caspian ... main board
c. CEC CD 2100+3100
d. Audiomecca Obsession
e. Krell KAV250CD MK-I
f. Roksan Caspian (M-Series 1)
g. Parasound C/BD2000

The mentioned PCB number "4B10012700C" ("4B10012700 C") by post #1 isn't correct.
This PCB version is in use by the belt drive CEC models "TL51X" and "TL5100X" (see attached pictures).
From which small cd player model I must have the service manual to this servo board (I have only the schematic without explanation of the adjustment procedure) ?? Or know anybody a download source of the service manual from this both CEC belt drive models?

[hypnos]

Hi, please can you advice me, where i found schematic manual for CD CEC Evolution 1, CEC CD3300 and CEC 3100? I found it only 2100. Thanks for your answer.