diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   miniDSP and Buffalo dac (http://www.diyaudio.com/forums/digital-source/203001-minidsp-buffalo-dac.html)

Chuck Norris 22nd December 2011 05:57 PM

miniDSP and Buffalo dac
 
Hello all.. I recently convinced myself that a digital crossover like the minidsp will outperform any active analog crossover and at the same time I also convinced myself that a diy dac like the buffalo III with Legato 3.1 I/V stage will be just about as good as any dac gets.. Well certainly better than my Audio alchemy XDP/DTI anyway.
Please correct me if i'm way off so far!!

So now i'm considering buying all this stuff, but I dont want to use the oneboard dac in the minidsp and likewise I dont want to use the digital volume.. This is what I had in mind:

cd player spdif out => minidsp (2 way crossover) => Buffalo dac => preamp/step attenuator => and the rest is no surprise!

How do I go about doing this?
How do I make the minidsp spit out 2 crossed digital signals - one for bass and one for treble?
Will I be needing 4 Buffalo's and 4 Legato's?
Is it possible to buy a 4 way step attenuator as a volume control? Or how do I manage analog attenuation of 4 seperate signals?


Regards
Chuck


All times are GMT. The time now is 10:07 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2