Active Crossover For Home Theater 3-way

2MuchRiceMakesMeSick · 30th November 2011, 06:44 PM

I would like to look into active setup for my 9.1 home theater. I already have a pioneer SC-57 with pre-outs on the back for each of the channels. I have the drivers for this kit already SEAS TJL3W.

What are some decent to look at?

Ive been looking at this one Behringer DCX2496 Ultradrive Pro Digital Crossover 248-669 but is there a box that can handle a 9/10channels already?

I may go passive but I figure active is worth looking into since passive parts are really expensive.

picowallspeaker · 30th November 2011, 07:18 PM

I just realized that going active you'd need 9 x 3 amplifiers
Did you realize that

2MuchRiceMakesMeSick · 30th November 2011, 07:24 PM

Yes I would roughly need 5 (six channel) amplifiers.

picowallspeaker · 30th November 2011, 07:39 PM

You should eat some nobile proteins , too ----

2MuchRiceMakesMeSick · 1st December 2011, 11:09 PM

Does anything have anything valueable to say? What are some good brands that I should look into/research?

Shaun · 2nd December 2011, 02:37 AM

Take a look at Bodzio's Ultimate Equaliser. It is a PC-based DSP system using 2 sound cards and advanced DSP engine. Bodzio Software .

You could also check out MiniDSP 8x8 board. You'd probably need more than one, though. miniDSP 8x8 kit | miniDSP

30th November 2011, 06:44 PM	#1
2MuchRiceMakesMeSick diyAudio Member Join Date: Oct 2011	Active Crossover For Home Theater 3-way I would like to look into active setup for my 9.1 home theater. I already have a pioneer SC-57 with pre-outs on the back for each of the channels. I have the drivers for this kit already SEAS TJL3W. What are some decent to look at? Ive been looking at this one Behringer DCX2496 Ultradrive Pro Digital Crossover 248-669 but is there a box that can handle a 9/10channels already? I may go passive but I figure active is worth looking into since passive parts are really expensive.

2nd December 2011, 02:37 AM	#6
Shaun diyAudio Member Join Date: Aug 2001 Location: Cape Town, South Africa	Take a look at Bodzio's Ultimate Equaliser. It is a PC-based DSP system using 2 sound cards and advanced DSP engine. Bodzio Software . You could also check out MiniDSP 8x8 board. You'd probably need more than one, though. miniDSP 8x8 kit \| miniDSP __________________ Shaun Onverwacht \|\|\|\|\|\|\|\|\|\| DON'T PANIC \|\|\|\|\|\|\|\|\|\|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help With Crossover 3-Way Seas 9.1 Home Theater	2MuchRiceMakesMeSick	Analog Line Level	54	12th December 2011 08:20 PM
Home Theater Receiver crossover network	navin	Solid State	1	8th November 2011 12:22 PM
home active crossover	mavric	Swap Meet	0	9th February 2010 10:54 AM
Custom Home Theater Project in New Home, Opinions appreciated.	thadman	Multi-Way	5	20th November 2008 12:40 AM
Active Crossover and 7.1 Home Cinema Amp	mikethomas79	Multi-Way	4	28th February 2008 01:53 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th November 2011, 07:18 PM	#2
picowallspeaker diyAudio Member Join Date: Apr 2007	I just realized that going active you'd need 9 x 3 amplifiers Did you realize that

30th November 2011, 07:24 PM	#3
2MuchRiceMakesMeSick diyAudio Member Join Date: Oct 2011	Yes I would roughly need 5 (six channel) amplifiers.

30th November 2011, 07:39 PM	#4
picowallspeaker diyAudio Member Join Date: Apr 2007	You should eat some nobile proteins , too ----

1st December 2011, 11:09 PM	#5
2MuchRiceMakesMeSick diyAudio Member Join Date: Oct 2011	Does anything have anything valueable to say? What are some good brands that I should look into/research?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)