Marantz CD-50 and CD-60, TDA1541, CDM4/19 - Page 55

Mayday · 22nd January 2012, 10:46 AM

Just looking for a smooth surface.
Will clean and re-grease again.

Kim Schultz · 27th January 2012, 10:35 AM

Any updates on the 7220 seperate ps and the reclock ?

Btw, greetings from Denmark

Regards
Kim

Mayday · 27th January 2012, 10:42 AM

Quote:

Originally Posted by Kim Schultz

Any updates on the 7220 seperate ps and the reclock ?

Btw, greetings from Denmark

Regards
Kim

Hi there neighbor

Btw, my stepfather is from Denmark.

I've ordered a 27R 3W resistor today to give the TPR a final test with a 175mA load.

I'm waiting for replacement elcos for the ones I soldered in the wrong way while running a fever...poff.

Then I'll start by replacing them, fitting the TPR w transformer.

Regards,
Jonas

Mayday · 09:59 AM

Recieved replacement caps today

Don't know if I'll have time to work on the CD-60 today though.

Mayday · 3rd February 2012, 09:10 AM

Got 4 of these today, two goes in the CD-50 and the other two in a CD-75dx.
6,8uF/250V

Mayday · 3rd February 2012, 12:28 PM

Replaced the exploded caps. Rubycon ZL and ZLH.
Put Sanyo OScon SEPC for all digital IC's

UV101 · 8th February 2012, 06:51 AM

How's things sounding? I'm busy moving house which is why I've been a bit quiet.....

Mayday · 8th February 2012, 08:20 AM

Sounding good, but still haven't gotten around to the regs or clock.

I hope moving isn't too much work and that the new house is good

Mayday · 12th February 2012, 10:56 AM

CD-75DX

Hmm, where could I find a replacement rubber ring for the disc-holder attached to the motor?

Examples of what I'm talking about, but just the "o-ring"

Philips CDM 2/10 lasereinheit | eBay

Philips CDM 2/10 lasereinheit | eBay

coolnose · 11:47 AM

eBay: 6 Stk. Antriebsriemen für CD Player usw. 35 mm x 1,5 mm

Dunno if they send to Sweden though, but why shouldn't they..

I will order from them this week if they are willing to ship to France.

Cheers,

Max

22nd January 2012, 10:46 AM	#541
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	Just looking for a smooth surface. Will clean and re-grease again. __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg

1st February 2012, 09:46 AM	#544
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	Recieved replacement caps today Don't know if I'll have time to work on the CD-60 today though. __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg Last edited by Mayday; 1st February 2012 at 09:59 AM.

3rd February 2012, 09:10 AM	#545
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	Got 4 of these today, two goes in the CD-50 and the other two in a CD-75dx. 6,8uF/250V __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg

3rd February 2012, 12:28 PM	#546
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	Replaced the exploded caps. Rubycon ZL and ZLH. Put Sanyo OScon SEPC for all digital IC's __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg

8th February 2012, 06:51 AM	#547
UV101 diyAudio Member Join Date: Dec 2008 Location: Oxford	How's things sounding? I'm busy moving house which is why I've been a bit quiet..... __________________ When Bitstream came out, I thought, “my God, what are we going to do...?” Ken Ishiwata http://www.hifisounds.co.uk Restek Fantasy, Audio Aero Capitole MKII, Focal and Kimber "Leave Nothing as Standard"


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th January 2012, 10:35 AM	#542
Kim Schultz diyAudio Member Join Date: Feb 2003 Location: Hundested, Denmark	Any updates on the 7220 seperate ps and the reclock ? Btw, greetings from Denmark Regards Kim

8th February 2012, 08:20 AM	#548
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	Sounding good, but still haven't gotten around to the regs or clock. I hope moving isn't too much work and that the new house is good __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg

12th February 2012, 10:56 AM	#549
Mayday diyAudio Member Join Date: Mar 2004 Location: Sweden	CD-75DX Hmm, where could I find a replacement rubber ring for the disc-holder attached to the motor? Examples of what I'm talking about, but just the "o-ring" Philips CDM 2/10 lasereinheit \| eBay Philips CDM 2/10 lasereinheit \| eBay __________________ The more you learn, the more you realize how little you know... Mayday DIY blogg

12th February 2012, 11:46 AM	#550
coolnose diyAudio Member Join Date: Sep 2009	eBay: 6 Stk. Antriebsriemen für CD Player usw. 35 mm x 1,5 mm Dunno if they send to Sweden though, but why shouldn't they.. I will order from them this week if they are willing to ship to France. Cheers, Max Last edited by coolnose; 12th February 2012 at 11:47 AM. Reason: Just realized you were not talking about the belt... I left the post, the info might be useful for others

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marantz CD-40 (TDA1541A & CDM4): need help!	Malefoda	Digital Source	1	29th December 2009 02:29 PM
FREE Marantz CD-50 SE metal-plastic chassis (CDM4 based)	honinbou	Swap Meet	0	7th June 2009 02:34 PM
Tube stereo for E 60 including TDA1541 cd player	Westerp	Tubes / Valves	3	27th April 2009 02:04 PM
FS: Ariston CD1 cd player, CDM4/19 + TDA1541A(si)+OPA627BP	mudihan	Swap Meet	13	6th July 2006 04:24 AM
CD-RW on CDM4/19 players....	Lyra	Digital Source	3	25th May 2004 06:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read