Go Back   Home > Forums > Source & Line > Digital Source
Reload this Page XMOS-based Asynchronous USB to I2S interface
Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
Page 157 of 173 « First 57107147155156 157 158159167 Last »
 
Thread Tools Search this Thread
Old 27th December 2012, 06:25 PM   #1561
diyAudio Member
 
Join Date: Nov 2007
Quote:
Originally Posted by qusp View Post
I guess you mean the Murata EMIFIL NFM/L/R/E range? excellent parts, they look like 4 terminal but are 3 terminal. they come in larger than 0603 these days, right up to 2220
There are other manufacturers like TDK that make similar products but, in my opinion, with less performance. After all passing years I will (finally) have the chance to solder some in January on a new board that will come out soon.
Cheers,
L
__________________
Contact form for WaveIO USB-to-I2S interface
Daughter card GB list for WaveIO can be found here
  Reply With Quote
Old 27th December 2012, 09:36 PM   #1562
jrling is offline jrling  United Kingdom
diyAudio Member
 
Join Date: Jan 2010
Location: London England
Default New Board?
I am sure that I am not alone in wondering what new board you are planning?
I assume you do not mean the WaveIO daughter board.

Please tell us!
  Reply With Quote
Old 28th December 2012, 09:59 PM   #1563
diyAudio Member
 
Join Date: Sep 2004
If i properly understood, than if i want to use isolated i2s output i need separate 3.3V power supply. How do do it properly ?
I am using TP Placid to power my WaeIO. Can i just connect another regulator to 5v Placid output to get 3.3 V ? Any hints ?
  Reply With Quote
Old 29th December 2012, 07:36 AM   #1564
diyAudio Member
 
Join Date: Oct 2008
Location: Bologna, Italy
Quote:
Originally Posted by sinski View Post
If i properly understood, than if i want to use isolated i2s output i need separate 3.3V power supply. How do do it properly ?
http://www.nve.com/Downloads/il71x.pdf

You can supply anywhere from 3.0 to 5.5Vdc
  Reply With Quote
Old 29th December 2012, 08:00 AM   #1565
diyAudio Member
 
Join Date: Feb 2009
Location: Brisbane, Australia
Quote:
Originally Posted by sinski View Post
If i properly understood, than if i want to use isolated i2s output i need separate 3.3V power supply. How do do it properly ?
I am using TP Placid to power my WaeIO. Can i just connect another regulator to 5v Placid output to get 3.3 V ? Any hints ?
The voltage that you supply the 'clean' side should be the same as the logic voltage level expected by your DAC.

You should not use the placid reg that supplies the WaveIO as this then passes the noise propagating on the ground connection to the 'clean' side and this negates the intention of the isolator. So a separate regulated supply should be provided to the 'clean' side of the WaveIO isolated output.
  Reply With Quote
Old 29th December 2012, 10:32 PM   #1566
diyAudio Member
 
Join Date: Nov 2002
Location: Cologne, Germany
I use currently a lt1084-regged psu for the isolator...and I am wondering if not taking the 3.3v from the buffalo-dac would not be even better, e.g. from the i2c connector ? I read somewhere that looking at the isolator psu wise as part of the dac makes most sense, so identical noise is helpful. If that is the case...which 3.3v tap from the buffalo is adviseable ? I believe there are at least two different areas or regs i could try to use...
  Reply With Quote
Old 31st December 2012, 09:07 PM   #1567
brgds is offline brgds  Poland
diyAudio Member
 
Join Date: Apr 2006
Location: Poland
Guys, could you pls advise the physical dimensions of the WaveIO board. Thanks.
__________________
Andy
  Reply With Quote
Old 31st December 2012, 09:30 PM   #1568
mjock3 is offline mjock3  United States
diyAudio Member
 
Join Date: Jan 2011
Location: Wisconsin
Dimensions are: 66.2mm x 68.2 mm
  Reply With Quote
Old 31st December 2012, 09:42 PM   #1569
brgds is offline brgds  Poland
diyAudio Member
 
Join Date: Apr 2006
Location: Poland
Thanks mjock3, and Happy New Year!
(counting down last quarter of 2012 on my side
__________________
Andy
  Reply With Quote
Old 31st December 2012, 09:54 PM   #1570
mjock3 is offline mjock3  United States
diyAudio Member
 
Join Date: Jan 2011
Location: Wisconsin
Happy New Year to you as well as the rest of the DIY community.
  Reply With Quote

Reply
Page 157 of 173 « First 57107147155156 157 158159167 Last »

« Previous Thread | Next Thread »

Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
exaU2I - Multi-Channel Asynchronous USB to I2S Interface exa065 exaDevices 1303 10th May 2013 05:19 PM
Ultimate USB to I2S interface sampler Digital Source 206 30th January 2012 03:45 PM
Introducing miniStreamer: Native 24/96 USB to I2S / SPDIF interface minidsp miniDSP 35 13th January 2012 07:02 PM
Is it possible to develop a ASIO driver for PCM2900 based USB Audio interface? cxhawk Digital Source 7 3rd December 2010 02:30 PM
interface I2S with USB mermoz Digital Source 0 21st February 2003 10:34 AM


New To Site? Need Help?

All times are GMT. The time now is 08:34 AM.

Home - Contact Us - Advertise - Suggestions & Requests - Rules - Store - Sponsors - Archive - Privacy Statement - Terms of Service - Top

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 27.27%)
Copyright ©1999-2013 diyAudio