Hi all,
I was given a Jolida JD-100 CD player by a friend because it needs to be repaired. The wires for the power switch to the circuit board are not connected and there aren't any RCA plugs.
I was hoping that someone, if they have one of these players, could take a picture of the power switch wires to the circuit board and the wires from the circuit board to the RCAs.
Thanks in advance
I was given a Jolida JD-100 CD player by a friend because it needs to be repaired. The wires for the power switch to the circuit board are not connected and there aren't any RCA plugs.
I was hoping that someone, if they have one of these players, could take a picture of the power switch wires to the circuit board and the wires from the circuit board to the RCAs.
Thanks in advance
Well, I got the power side fixed. So on to the RCAs. I have a couple of questions that I hope someone can give me some advice on.
There are the 4 signal wires for the 2 sets of RCAs but I only see one wire that looks like its a ground wire. Should I gang the 4 grounds from the RCAs jacks to this one? Does it sound like I'm missing something?
Thanks in advance!
There are the 4 signal wires for the 2 sets of RCAs but I only see one wire that looks like its a ground wire. Should I gang the 4 grounds from the RCAs jacks to this one? Does it sound like I'm missing something?
Thanks in advance!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.