Wiring Output Transformer to DAC (Rudimentary

nathanjh13 · 27th February 2011, 06:34 PM

Hiya

I'm wiring two Cinemag Output Transformers (CMOQ-2H) to a Gigaworks DAC. Nothing new I know, but I'd like to check the wiring to make sure I'm doing it right.

On the attached schematic and photos:

Do I pair the wires up as shown and then solder away?

Or are the Red, Orange, Blue and Violet not used?

I can fathom the rest I think.
Thanks

barry.childs · 27th February 2011, 06:56 PM

Red and orange should be soldered together and then not used. Blue and violet should be soldered together and then not used. Brown and yellow to the dac. Green and grey to the RCA's.

euro21 · 27th February 2011, 06:58 PM

Connect Red to Orange.
Connect Blue to Violet.
Brown and Yellow is input, Green and Grey is output.

nathanjh13 · 27th February 2011, 07:02 PM

Perfect, thanks a million, I considered that looking at the diagram but thought I'd better double check.
Nath

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to specify a transformer for dac output?	sharpi31	Digital Line Level	12	3rd March 2010 09:15 PM
heathkit s-99 output transformer wiring	tac	Parts	0	7th December 2008 08:03 AM
Quick output transformer wiring question	wicked1	Tubes / Valves	4	30th April 2008 03:56 PM
Push Pull Output Transformer wiring problem	cyl	Tubes / Valves	8	25th April 2007 02:23 AM
DAC transformer output?	Rotellian	Digital Source	0	21st January 2004 01:51 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th February 2011, 06:56 PM	#2
barry.childs diyAudio Member Join Date: Jun 2008 Location: Lostwithiel, Cornwall	Red and orange should be soldered together and then not used. Blue and violet should be soldered together and then not used. Brown and yellow to the dac. Green and grey to the RCA's.

27th February 2011, 06:58 PM	#3
euro21 diyAudio Member Join Date: Sep 2004 Location: Budapest	Connect Red to Orange. Connect Blue to Violet. Brown and Yellow is input, Green and Grey is output.

27th February 2011, 07:02 PM	#4
nathanjh13 diyAudio Member Join Date: Jul 2010 Location: York Uk	Perfect, thanks a million, I considered that looking at the diagram but thought I'd better double check. Nath

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)