Getting error on an Ah! Njoe

mjock3 · 15th January 2011, 08:19 PM

I have an ah! that was working just fine until I decided to add a new clock. After getting it wired in I have either a "no disc" error showing or more often than not a "disc not finalized" error reading.

Any ideas if I might have done this or if it might be something else, and what I can do?

Thanks,

Mark

singa · 16th January 2011, 06:55 AM

Hi,
If your clock installation is correct ie. all connections went to the right places and if you have pulled the laser flexibe cable to access the pcb ,check the cable is inserted in the right orientation as pin contacts are facing one way only so is it the right side up.What about the other end? Singa.

mjock3 · 16th January 2011, 05:33 PM

Thanks Singa,
I checked the flex cable and it looks OK.
I have tried other disc's and there are times when it will read the number of tracks and total time on disc. But when I press play nothing. Also the laser moves up and down while trying to read disc, and the disc does turn though it does not get full speed. It seems as though it gets going then stalls, then gets going and stalls. Continues doing this until I either get the error or it reads the disc. Not sure is this normal? Also I have removed the clamp and was able to see red light coming out of laser.

Thanks,
Mark

15th January 2011, 08:19 PM	#1
mjock3 diyAudio Member Join Date: Jan 2011 Location: Wisconsin	Getting error on an Ah! Njoe I have an ah! that was working just fine until I decided to add a new clock. After getting it wired in I have either a "no disc" error showing or more often than not a "disc not finalized" error reading. Any ideas if I might have done this or if it might be something else, and what I can do? Thanks, Mark

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ah Njoe Tjeob Upgrades? Intro to mods!	HaLo6	Digital Source	9	5th June 2009 12:25 AM
AH NJoe TJOEB, valve compatibility issue	emperor	Tubes / Valves	5	14th November 2007 03:56 AM
AH Njoe Tjoeb CD player, valve Compatibility	emperor	Digital Source	0	13th November 2007 05:15 PM
Ah Njoe Tjoeb 4000 problem	emperor	Tubes / Valves	9	30th October 2007 05:06 PM
Njoe Tjoeb upsampler and balanced output	jax8308	Digital Source	3	22nd April 2006 04:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th January 2011, 06:55 AM	#2
singa diyAudio Member Join Date: Apr 2004 Location: near	Hi, If your clock installation is correct ie. all connections went to the right places and if you have pulled the laser flexibe cable to access the pcb ,check the cable is inserted in the right orientation as pin contacts are facing one way only so is it the right side up.What about the other end? Singa.

16th January 2011, 05:33 PM	#3
mjock3 diyAudio Member Join Date: Jan 2011 Location: Wisconsin	Thanks Singa, I checked the flex cable and it looks OK. I have tried other disc's and there are times when it will read the number of tracks and total time on disc. But when I press play nothing. Also the laser moves up and down while trying to read disc, and the disc does turn though it does not get full speed. It seems as though it gets going then stalls, then gets going and stalls. Continues doing this until I either get the error or it reads the disc. Not sure is this normal? Also I have removed the clamp and was able to see red light coming out of laser. Thanks, Mark

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)