USB DSD DAC and ADC by ElectrArt - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th November 2010, 07:45 PM   #1
diyAudio Member
 
Join Date: Oct 2004
Location: NYC
Send a message via AIM to alexcount Send a message via Yahoo to alexcount Send a message via Skype™ to alexcount
Cool USB DSD DAC and ADC by ElectrArt

OK so I pulled the plug and managed to order a USB-Dual Audio PCB from ElectrArt, a japanese company selling a board with an FPGA that can record and playback Normal rate DSD (64fs or 2.82mhz) and even dual rate dsd (128fs or 5.6mhz!!!) over USB, also PCM.
This is groundbreaking as its the only way short of $10k of equipment to play back 128fs DSD from a PC.

I haven't seen much talk about it in English, though I found ElectArt on a lead from a single post in a thread about the Buffalo-II on this forum from member 'Bunpei'.

The board as it comes will input or output either I2C or DSD bitstream, and needs to be hooked up to your favorite dsd capable DAC (Buffalo-II, DSD1794a based etc.)and ADC (ElectArt offers an unpopulated PCB based of of the TI PCM 4022)

I paid $384USD for 1 USB-DUAL-AUDIO PCB built and tested and 1 each of a level meter, ADC and DAC pcb unpopulated. I hope to use a stock TI PCM4022 2ch or PCM4024 4ch development ADC board, available for $200 and a TwistedPear buffalo-II kit as the DAC for testing until I build the DSD1794a board. My own plans involve class a input and output stages for the ADC and DAC, either tube (12b4a, single plate 2a3) or all discrete.

Anyone else interested in the ability to play DSD over usb?
It currently only has drivers and software for windows machines (xp-7), but mac os x development seems to be on the horizon, with 24bit 192khz working now on 10.6.3, really hope dsd for os x comes.....
They talk a lot about use of an Asynchronous USB design, the same design methodology used on the USB port implementation on the Ayre QB-9.

Personally I welcome these developments, and can't wait to get my board and be among the first in a new wave of affordable DSD soundcards. The possibilities to make my own ADC or DAC for dsd with a tube/discrete analog section, for archiving my vinyl/tape masters and live recording, is very exciting.

I have read through (poorly) translated pages of every forum in japanese I could talking about this, as far as I can gather they have had this for almost a year, but in different levels of development, not sure how long its all been fucntioning properly...
forum link (translated)

Please lets start a discussion, I would like this to be the English reference page for information on this. I feel we are breaking new ground here. I am waiting for the package, I will keep everyone posted on my progress.

btw, USBPAL from RigiSystems, a swiss company is the only product like it i've seen, seems more commercial. It doesn't offer input for a ADC, but it is a way for product developers to add DSD input to a DAC's, might be what the new Mytek DAC is based off of....
-Alexander Countey
  Reply With Quote
Old 18th November 2010, 06:32 PM   #2
diyAudio Member
 
Join Date: Oct 2004
Location: NYC
Send a message via AIM to alexcount Send a message via Yahoo to alexcount Send a message via Skype™ to alexcount
bump
comeon, Anyone else up for a DSD ADC or DAC with usb connections? This is DSD and PCM project so it's 2 birds with 1 stone. There is a lot for us all to learn about DSD here. I know that real information on dsd is lacking in the DIY community.

I'm still waiting on the board, will post pics when it arrives. Someone speak up if interested in my progress, otherwise I wont update as often.
I am just trying to build a better more 'analog' sounding digital frontend (isn't everyone), thought I would get more interest (debates over dsd vs pcm aside)

Disclaimer: I have NO connection with any of these companies, other than buying this kit from them.
  Reply With Quote
Old 18th November 2010, 07:58 PM   #3
jgazal is offline jgazal  Brazil
diyAudio Member
 
Join Date: Dec 2008
I see people would like to read DSD digital files if they record their own material with a recorder such as this or this.

Something I still do not see is high definition DSD tracks being sold on internet.

I have seen just linear pcm (which includes DXD) and lossless codecs (for instance flac).

Is there a way of ripping SACD disc's? I thought they were copy protected (even those proprietary links that output such files from the transport to a external DAC).

Where are you sourcing DSD, DSDIFF, DSF or WSD material/files to store on your hard-disc?
  Reply With Quote
Old 18th November 2010, 09:20 PM   #4
diyAudio Member
 
Join Date: Oct 2004
Location: NYC
Send a message via AIM to alexcount Send a message via Yahoo to alexcount Send a message via Skype™ to alexcount
I am planning on testing this with some of the DSF files available from 2L, and some live material recorded with a korg mr1000 (from punk group bad brains), I also plan to record some of my vinyl with a custom ADC.
The software ElectrArt have written for this project will playback DSDIFF, DSF files and possibly WSD, but I will have to check to be sure. It's called PlayAudio, very basic software, it's used for recording and playback.
  Reply With Quote
Old 20th November 2010, 05:15 AM   #5
qusp is offline qusp  Australia
diyAudio Member
 
qusp's Avatar
 
Join Date: Oct 2009
Location: Brisbane, Australia
Quote:
Originally Posted by alexcount View Post
I am planning on testing this with some of the DSF files available from 2L, and some live material recorded with a korg mr1000 (from punk group bad brains), I also plan to record some of my vinyl with a custom ADC.
hahahaha, you are using Bad brains to test for quality of a high resolution datastream? too funny. I used to love bad brains when in my teens and early 20's, but their recordings, and live performances (yes i've seen them live too) are not what I would call 'reference' even live the sound is raw and the recording is likely to be overdriven.

an interesting product and project for sure, but it really isnt all that useful IMO, until more content is available recorded and supplied in 1bit format, t will be more of a gimmick, or tool for archival purposes rather than listening
  Reply With Quote
Old 20th November 2010, 01:50 PM   #6
diyAudio Member
 
Join Date: Jan 2008
Location: Virginia
Agree with that... Quality DSD material will not be "free" of the SACD hardware encryption, because they saw what happend with PCM material (CD/DVD-A) once it "entered" the PC realm.
  Reply With Quote
Old 21st November 2010, 07:42 PM   #7
diyAudio Member
 
Join Date: Oct 2004
Location: NYC
Send a message via AIM to alexcount Send a message via Yahoo to alexcount Send a message via Skype™ to alexcount
Maybe you didn't have a good enough turntable at the time. 'I against I' was mastered by Bob Ludwig at masterdisk, and I find it very well recorded, but you need a clean first pressing lp to truly respect it.... I simply thought as such a fast paced band with so much happening simultaneously might be a good stress test

I mostly plan to test using the professionally recorded files from 2L.no, which I find sound very well recorded PCM, and I have read they are a good reference for what DSD is capable of. My testing of the ADC and DAC will involve standard test equipment (signal generator/oscilloscope) and careful listening tests. Ultimately I want this to be a 'mastering quality' ADC and DAC, no easy task of course, but I will not stop development of the analog side until I am satisfied this is met (I can dream can't I).

RANT/
Well source material aside, one of my goals is to simply create the environment where average people COULD possibly playback dsd, and with that maybe a means of 'backing up' existing SACDs might come around. With the current state of affairs, if we DID have bit perfect backups of SACD's sitting on a harddrive, we would still have no means of playing those files without some very expensive gear (Mytek, Meitner, DAD etc). I like to think about how CD's were around for awhile before people got into backing them up, but not until music playback from PC's became commonplace. Of course there no real copy protection on CD's, but my point stands. the DMCA of outright forbids breaking or bypassing copy protections, but as fair-use DVD backups are a legal grey area, I feel this should have the same protection. I am hesitant to invest in any digital media I can't make fair-use bitperfect backups of.
/END RANT
  Reply With Quote
Old 27th January 2011, 10:14 PM   #8
diyAudio Member
 
Join Date: Oct 2004
Location: NYC
Send a message via AIM to alexcount Send a message via Yahoo to alexcount Send a message via Skype™ to alexcount
Smile It Works!

I have received the last part I needed, the Buffalo-II DAC. After wiring up all power supplies and boards I got DSD playback working. another hour figuring out jumper settings and I got recording working. Testa so far are preliminary, with only a few records and some radio recorded. I am impressed so far with the sound quality, the buffalo-II certifiably blows away my previous DAC with 16/44.1 and 24/96 sources (not surprising).

The DIY part of my project is just starting, but this proof of concept is working. I am excited to have access to this format on my computers, arguments aside about dsd/pcm debates....
I am planning a few custom analog stages, both for the DAC and ADC. First tests with the buffalo are with the Legato I/V stage, impressed so far.

My plans are to experiment with other discrete class a stages and definitely going to try SET tubes at some point, maybe some 2a3 single plates.... Really the analog end is endless, so many schools of thought on the subject, just know I am ideologically opposed to using IC opamps, just seems lazy/cheap.

The ElectrArt has 2 modes, a usb 1.0 generic driver mode, that works on os x and windows 24bit/96khz without dsd support, and USB 2.0 asynchronous mode, with a proprietary driver that only supports DSD 2.8mhz and 5.6mhz on windows so far. Playback and recording also only with proprietary very basic software, with no English documentation.

On the digital side adding SDIF-3 I/O, possibly also DSD over optical cable via the meitner spec (thx Ted). Modding a sacd player with SDIF-3 is also on the horizon (gotta figure it out) . I am a firm believer we need real standards here for greater acceptance of the format, many people want a pure connection for feeding DSD to there DAC without downsampling, but the only options now are VERY expensive. (ie. boutique audiophile or high end professional gear) SDIF-3 is found on more gear AFAIK (Neve DSD ADC, Tascam dsd recorders, DAD, Prism, Meitner.) Also looking into a method of sending DSD over HDMI, probably not for compatibility with modern receivers or other DAC's, but only for a high quality cable...

If anyone else wants to follow in my footsteps all the parts are available to anyone, and there are many options for ADC and DAC, depending on whether dsd 128fs is needed. the AKM chips are very interesting, but i could only find ones suporting 64fs, and I wanted 128fs for my first tests.

If you have the cash the ESS9018 Evaluation Kit is $666 with powersupply and I/V stage, not sure if it sounds better than a Buffalo-II, but it is a plug and play solution for those not wanting to build a buffalo kit and all of its associated powersupplies/analog boards. The ADC was a evaluation kit ordered from TI, chosen because it's internal logic is 1-bit DSD, making the dsd files very much like a "raw" format. The PCM- 4222 has better specifications and dsd 128fs, but is internally 5-bit Delta sigma, though it is possible to feed out raw 5-bit delta sigma signal for custom mathematical interpretation, which I believe is what DAD is doing.... If anyone knows of or can help find other dsd compatible DAC's and ADC's from other manufactures I'm all ears. Let's start a DIY DSD community!!!

BTW, still blown away by Ted Smith's Discrete DSD DAC. You guys seen that? I want to make one so much it hurts It's amazing you can search for hours if not weeks and not find something online, then it just appears!
  Reply With Quote
Old 30th January 2011, 03:56 AM   #9
AR2 is offline AR2  United States
Master Burner
 
AR2's Avatar
 
Join Date: Dec 2002
Location: San Francisco, California
Alex,
Congrats on getting your system together. You are pioneering and that is why there are not to many people participating. Maybe more people are just reading but not posting. Honestly there is much to absorb. I will join you here to give you support.

I am on the different path, but my approach certainly doesn't exclude DSD. Here is where I am now. I just ordered today Buffalo II with Legato. Since you are analog lover, like myself, you will love this. I have California Lab Sigma II DAC already long time. That is DAC with tube output. Long time ago I did some updates and exchanged all PS caps to Black Gates. But that is old 16/44.2 DAC. I checked today and it will be very easy to pull digital parts and to instal Buffalo II. The case is very big, and I will be able to easily drop in Buffalo. I will use complete tube output that is already there. Additionally there is already 5V regulated supply, and that is all needed for Buffalo. I am planning to install relay to switch output btw. tube and Legato, so that I could use any one any time.

I just learned today about I2S to HDMI converter. I would be very much interested in finding how to tap into my Denon 2910 SACD player. I also have Pioneer BlueRay player. I am wondering if I would be able just to plug HDMI cable into it and than go to that converter that will take signal to Buffalo? It seems like there are so many options and so little info available. I will share here what I find. Did you follow thread about the SD card player?

My ultimate goal is to find some DSP processor that outputs digital signals to outboard DACs for phase perfect crossover. I will see how good is Buffalo, and if I like it I will end up with three DACs for that purpose.
__________________
www.burningamp.com
  Reply With Quote
Old 6th February 2011, 04:23 PM   #10
lgo51 is offline lgo51  United States
diyAudio Member
 
lgo51's Avatar
 
Join Date: Mar 2002
Location: MileHigh
Thumbs up ...and then there were two

Quote:
Originally Posted by alexcount View Post
If anyone else wants to follow in my footsteps all the parts are available to anyone, and there are many options for ADC and DAC, depending on whether dsd 128fs is needed. the AKM chips are very interesting, but i could only find ones suporting 64fs, and I wanted 128fs for my first tests.<snip>... If anyone knows of or can help find other dsd compatible DAC's and ADC's from other manufactures I'm all ears. Let's start a DIY DSD community!!!
count me in
BTW: do you have any pix of your creation?
Quote:
Originally Posted by alexcount View Post
BTW, still blown away by Ted Smith's Discrete DSD DAC. You guys seen that? I want to make one so much it hurts It's amazing you can search for hours if not weeks and not find something online, then it just appears!
Link?
__________________
"Dr. Elefun was my mentor."
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for a 24 bit USB ADC board pebo Digital Line Level 11 13th April 2013 04:11 PM
DAC Using DSD-1794A free2dev Digital Line Level 2 29th July 2010 02:09 AM
Anyone interested in a general purpose DIY SPDIF/USB/ADC/DAC interface board using th allanw Digital Source 4 27th July 2010 07:47 AM
Any interest in designing a USB ADC? TheSeekerr Parts 3 2nd December 2008 03:25 AM
What does a DSD DAC actually do? Cameron Digital Source 3 20th August 2004 05:18 PM


New To Site? Need Help?

All times are GMT. The time now is 01:11 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2