CD80 clock frequency 11.2896 to 11.0592?

Sam Spade · 24th October 2010, 10:15 AM

Dear all, I have ordered a new Burson clock for my CD80 Low Jitter Clock

The new one is 11.0592 MHz, but the original crystal is 11.2896 MHz.

Is the frequency difference a problem or can you just slot it straight in?

Note I also have some burson opamps HD Audio Opamp , and have found myself a TDA1541A S2 double crown DAC

While I have browsed the posts on the CD80, any case specific advice beyond these mods would be appreciated

Cheers
Sam

poynton · 24th October 2010, 11:04 AM

.

Why did you order a clock with 11.0592MHz when Burson do one at 11.2896MHz ?????

Andy

.

Sam Spade · 24th October 2010, 11:20 AM

I didn't....... we discussed the clock, I sent them the service manual and they said i needed an 11mhz clock...

Perhaps they accidentally sent me the wrong one.

abraxalito · 24th October 2010, 11:23 AM

Quote:

Originally Posted by Sam Spade

Is the frequency difference a problem or can you just slot it straight in?

It all depends if everything sounding about a third of a semitone flat counts as a problem. Many people wouldn't notice - it will also extend the playing time of your CDs by almost 2mins for the longest ones

Sam Spade · 24th October 2010, 11:29 AM

LOL ok then it is an issue ;-) Thanks Abraxalito, I will chase Burson up.

QSerraTico_Tico · 24th October 2010, 03:44 PM

It's definitely 11.2896MHz!

24th October 2010, 10:15 AM	#1
Sam Spade diyAudio Member Join Date: Oct 2010	CD80 clock frequency 11.2896 to 11.0592? Dear all, I have ordered a new Burson clock for my CD80 Low Jitter Clock The new one is 11.0592 MHz, but the original crystal is 11.2896 MHz. Is the frequency difference a problem or can you just slot it straight in? Note I also have some burson opamps HD Audio Opamp , and have found myself a TDA1541A S2 double crown DAC While I have browsed the posts on the CD80, any case specific advice beyond these mods would be appreciated Cheers Sam

24th October 2010, 11:04 AM	#2
poynton Magneto the Gravity Man diyAudio Member Join Date: Mar 2005 Location: A life on the ocean waves when I'm not at home in N. Wales (but I'm not Welsh so no sheep jokes!)	. Why did you order a clock with 11.0592MHz when Burson do one at 11.2896MHz ????? Andy . __________________ If it ain't broke, break it !! Then fix it again. It's called DIY !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing Outboard Clock Circuits from 16.93 MHz to 11.XX MHz frequency	dtm1962	Digital Source	3	21st February 2008 03:19 AM
free 11 by 11 inch heatzinc good for class a	karma	Swap Meet	9	14th January 2007 02:30 AM
For Sale one K.K. Ho Clock 11.2896 MHz	Elso Kwak	Swap Meet	5	30th July 2004 04:45 PM
For Sale Net Audio Miniclock 11.2896 MHz	Elso Kwak	Swap Meet	2	10th October 2003 10:23 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th October 2010, 11:20 AM	#3
Sam Spade diyAudio Member Join Date: Oct 2010	I didn't....... we discussed the clock, I sent them the service manual and they said i needed an 11mhz clock... Perhaps they accidentally sent me the wrong one.

24th October 2010, 11:29 AM	#5
Sam Spade diyAudio Member Join Date: Oct 2010	LOL ok then it is an issue ;-) Thanks Abraxalito, I will chase Burson up.

24th October 2010, 03:44 PM	#6
QSerraTico_Tico diyAudio Member Join Date: Oct 2004	It's definitely 11.2896MHz!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)