Cambridge 640C V2 Thumps When Disc Ejected

[Monjul]

Hi all. I have a Cambridge 640C V2 CD player that causes a relatively loud thump through the speakers when ejecting a disc that has been playing for a while. It sounds like DC offset so I'm wondering if this might be a static problem although it occur throughout the summer. I'm thinking static because the disc has to be playing for a while. Any suggestions to solve this problem would be appreciated.

[Monjul]

No one?

[Frank Berry]

It might be the mute circuit. Does it "thump" in both channels?

[Monjul]

Yes, it thumps in both channels. Should I pursue having this repaired? If I do, maybe I'll have the player upgraded/modified also. Are mods to this unit recommended?

[audio_tony]

Just adding comment here as a matter of interest.

I bought a 340 a few years back and that had the same problem.

I took it back to Richer Sounds where it was exhanged, so I don't know what was wrong with it..

However....

What I can say is that the fault is most likely on the servo board and not the DAC / Audio board, simply because the servo board is a common component to all three models. Audio output is in fact derived from this servo board on the 340 too.

Hope this is of some help.