help with noisy CD63SE

dine1967 · 1st July 2003, 12:55 PM

Well this CD player is about 8 years old now. The problem is with the CD drawer. Everytime I load/eject the CD, the drawer makes a loud funny sound (mechanical). Can somebody recommend what kind of lubricant to be used to get rid of the noise. Could there be any other problem like woren out plastic/rubber part???? Iam not really familiar with the mechanism and look forward for some help.
thanks,
Dinesh

ashok · 1st July 2003, 01:47 PM

Eject the tray and turn off the power. Turn the machine upside down and see if the teeth on the underside of the tray are damaged. You could apply some silicone grease on these if they look fine. You can push the tray back by hand. If it is the grease then it might take a few open/close routines to clear up the problem.
If this fails you will have to open the machine and trouble shoot. Are you a handyman ?
Cheers.

dine1967 · 1st July 2003, 02:50 PM

thanks for your help. I will open up the machine and clean it and apply silicon grease. Hope it will work.

jonclancy · 1st July 2003, 05:37 PM

with the Philips CDM9 transport on my Arcam. The teeth on the tray drivewheel were gone.

See this thread: Broken CDM9 Transport

Hope this helps. I repaired mine few a few GBP and a couple of hours - I have no expertise in this field whatsoever!!

Good Luck!

Jon

1st July 2003, 12:55 PM	#1
dine1967 diyAudio Member Join Date: Jan 2003 Location: NJ	help with noisy CD63SE Well this CD player is about 8 years old now. The problem is with the CD drawer. Everytime I load/eject the CD, the drawer makes a loud funny sound (mechanical). Can somebody recommend what kind of lubricant to be used to get rid of the noise. Could there be any other problem like woren out plastic/rubber part???? Iam not really familiar with the mechanism and look forward for some help. thanks, Dinesh

1st July 2003, 01:47 PM	#2
ashok diyAudio Member Join Date: Jun 2002 Location: 3RS	Maybe damaged teeth. Eject the tray and turn off the power. Turn the machine upside down and see if the teeth on the underside of the tray are damaged. You could apply some silicone grease on these if they look fine. You can push the tray back by hand. If it is the grease then it might take a few open/close routines to clear up the problem. If this fails you will have to open the machine and trouble shoot. Are you a handyman ? Cheers. __________________ AM

1st July 2003, 05:37 PM	#4
jonclancy diyAudio Member Join Date: Oct 2002 Location: UK	I had a similar problem..... with the Philips CDM9 transport on my Arcam. The teeth on the tray drivewheel were gone. See this thread: Broken CDM9 Transport Hope this helps. I repaired mine few a few GBP and a couple of hours - I have no expertise in this field whatsoever!! Good Luck! Jon

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Marantz CD63SE died	Pedja	Digital Source	19	17th April 2008 09:12 PM
Marantz CD63SE tray problem	dine1967	Digital Source	0	6th June 2006 06:05 PM
noisy noisy noisy noisy noisy tube	dsavitsk	Tubes / Valves	50	20th February 2006 04:07 PM
Marantz CD63SE malfunctioning	Bill Fitzpatrick	Everything Else	3	24th April 2005 01:55 AM
CD63SE help	johnmarkp	Digital Source	1	2nd September 2004 03:45 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st July 2003, 02:50 PM	#3
dine1967 diyAudio Member Join Date: Jan 2003 Location: NJ	thanks for your help. I will open up the machine and clean it and apply silicon grease. Hope it will work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read