Because the threat is 2 jears old and has more than 300 pages
i thought lets post al your clones here.
You are the topic starter, where are the pictures from your Shigaclone?
I'm still searching for a boombox
This is the power supply for the shigaclone and the DDDAC.
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 9V 5 volt for the Shigaclone board
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the trichord clock 4
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the 2 CD motor
OPEN-CHASSIS TRANSFORMATOR 500VA 2 x 12V 12 volt for the DDDAC.
1 ALWSR+ B&T ALWSR +5v Built & Tested Regulator - Shigaclone Board
1 ALWSR+ B&T ALWSR +8v Built & Tested Regulator - Trichord clock 4
Rudy
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 9V 5 volt for the Shigaclone board
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the trichord clock 4
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the 2 CD motor
OPEN-CHASSIS TRANSFORMATOR 500VA 2 x 12V 12 volt for the DDDAC.
1 ALWSR+ B&T ALWSR +5v Built & Tested Regulator - Shigaclone Board
1 ALWSR+ B&T ALWSR +8v Built & Tested Regulator - Trichord clock 4
Rudy
Attachments
Last edited:
Here you have my Shigaclone.
Rudy
Brother, your shigaclone is just wonderfull!!!!
What mecanism did you used?
Here you have my Shigaclone.
Rudy
That is brilliant !!! Well done !
You should start a thread on the construction of the player.
Andy
.
Hello all,
After lurking a long while, I've finally started working on a Shigaclone following Peter's advice. Here's the result. Not as beautiful as some of the masterpieces, but decent for me and singing from the first time !
There's room for improvement. The clear acrylic needs to be matted. The NC door switch needs a better one. The caps are Elna Silmic II, since I couln't find BG for a decent price.
Thank Peter and all the contributors. The shigaclone is a real pleasure.
Stephen
After lurking a long while, I've finally started working on a Shigaclone following Peter's advice. Here's the result. Not as beautiful as some of the masterpieces, but decent for me and singing from the first time !
There's room for improvement. The clear acrylic needs to be matted. The NC door switch needs a better one. The caps are Elna Silmic II, since I couln't find BG for a decent price.
Thank Peter and all the contributors. The shigaclone is a real pleasure.
Stephen
Attachments
Here you have my Shigaclone.
Rudy
that´s a beautiful,gorgeous piece of machinery you got there!
congratulations!
This may sound stupid,but somehow I managed to find this shigaclone mechanism inside a white brand boombox from mitsai...i´m not kidding!
This is the power supply for the shigaclone and the DDDAC.
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 9V 5 volt for the Shigaclone board
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the trichord clock 4
OPEN-CHASSIS TRANSFORMATOR 100VA 2 x 12V 8 volt for the 2 CD motor
OPEN-CHASSIS TRANSFORMATOR 500VA 2 x 12V 12 volt for the DDDAC.
1 ALWSR+ B&T ALWSR +5v Built & Tested Regulator - Shigaclone Board
1 ALWSR+ B&T ALWSR +8v Built & Tested Regulator - Trichord clock 4
Rudy
Beautiful build, wow really fantastic looking player ! Have you had a chance to compare it yet ? What level CD player will these clones compete with ?
regards,
Another example of Peter's superb work. I asked him to make me a Shigaclone chassis using Canadian maple and I think it really works well. Finished to an absolutely perfect standard. All I had to do was trim the diplay panel, solder up the buttons, replace one cap on the transport mechanism, add the SPDIF resistors and fit it all into place. It sounds - and looks - superb!
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Digital Source
- Shigaclone transport Gallery