Tent Labs reclocking for Shigaraki (47 Labs.) Transport.

Manolo47 · 12th February 2010, 04:50 PM

Maybe some member of this forum has installed the Tenbt Labs XO3 reclocking module in the Shigaraki transport or knows more than I do and thus can direct me in the right direction.

I guess the module is installed in the transport part of the combo..

I gather that the frequency is the same for the Sanyo -which I understand is the transport in the newer Shigaraki- is 639444 or something like that.

Thank you very much in advance.

Bill Fuss · 12th February 2010, 06:31 PM

I can tell you the transport and the SPDIF reclocking must use the same clock so you can either use an XO3 to replace the clock in the transport or build a circuit to reclock the output with a buffered existing clock signal. The freq. is probably 16.9344Mhz.

woodturner-fran · 13th February 2010, 06:24 PM

Have a look at the last 10 pages of the "Finally an affordable transport - The shigaclone" thread for other ideas....

Bill Fuss · 14th February 2010, 03:18 PM

That's a good read but can be confusing. I've been experimenting with a CDM4/M50423FP combo, with new clock, and using a flip-flop to reclock the SPDIF stream. It has improved the signal tremendously and is very noticable sonically. I have yet to look at the signal where it enters the receiver chip,it can probably benefit from better impedence matching.

12th February 2010, 04:50 PM	#1
Manolo47 diyAudio Member Join Date: Mar 2006 Location: San Juan	Tent Labs reclocking for Shigaraki (47 Labs.) Transport. Maybe some member of this forum has installed the Tenbt Labs XO3 reclocking module in the Shigaraki transport or knows more than I do and thus can direct me in the right direction. I guess the module is installed in the transport part of the combo.. I gather that the frequency is the same for the Sanyo -which I understand is the transport in the newer Shigaraki- is 639444 or something like that. Thank you very much in advance.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Philips Cd-Pro2 player/transport w/ tent labs XO3 clock - $1000 o.b.o.	Electro3000	Swap Meet	5	24th January 2009 11:03 PM
47 labs Koma TT	Brett	Analogue Source	2	9th August 2007 03:55 AM
47 labs Hotei speaker	al r.	Full Range	77	7th April 2005 08:01 PM
47 labs gaincard transformer	RAYSIMMONS	Solid State	1	17th April 2003 03:58 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th February 2010, 06:31 PM	#2
Bill Fuss RIP Join Date: Oct 2005 Location: Central Florida	I can tell you the transport and the SPDIF reclocking must use the same clock so you can either use an XO3 to replace the clock in the transport or build a circuit to reclock the output with a buffered existing clock signal. The freq. is probably 16.9344Mhz.

13th February 2010, 06:24 PM	#3
woodturner-fran diyAudio Member Join Date: Jan 2006 Location: Ireland	Have a look at the last 10 pages of the "Finally an affordable transport - The shigaclone" thread for other ideas....

14th February 2010, 03:18 PM	#4
Bill Fuss RIP Join Date: Oct 2005 Location: Central Florida	That's a good read but can be confusing. I've been experimenting with a CDM4/M50423FP combo, with new clock, and using a flip-flop to reclock the SPDIF stream. It has improved the signal tremendously and is very noticable sonically. I have yet to look at the signal where it enters the receiver chip,it can probably benefit from better impedence matching.