|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st June 2003, 05:03 PM
|
#1 |
|
diyAudio Member
Join Date: May 2003
Location: G-U
|
Help CDP-Modification
Hello there,
I am experimenting with an old Technics-MASH CDP (PG390) and would like to hardwire a new DAC to it. The LSI in the PG390 is named MN662713RG1. Found the signals BCLK, SRDATA, and L/R-Identification, but don't know if its MSB or LSB first and if the word length is really 16Bit. (Service Manual says BCLK 2.8224MHz, L/R is 44.1KHz). Does anyone know ? Marcus 
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Modification..... | Actuary | Tubes / Valves | 3 | 26th February 2008 01:34 AM |
| X-over modification | hermanho | Multi-Way | 1 | 20th February 2006 06:52 AM |
| XLR modification | inteificio | Everything Else | 52 | 25th February 2005 03:11 AM |
| Amp Modification | shajan | Solid State | 3 | 5th January 2004 06:21 PM |
| Zen modification | tschrama | Pass Labs | 8 | 29th December 2002 05:59 PM |
| New To Site? | Need Help? |
