Can you spot that CD transport (laser skipping problem)

yairf · 19th November 2009, 11:03 AM

Hi all
I need help identifying this CD transport. It is part of Brendensen CDP-1.
I'm not sure whether this is a CD-Rom or some sort of Philips CDM-12 .
Any help help spotting this will be appreciated.
Thanks,
Yair

Mooly · 12:53 PM

What does it say on the pickup. It's definitely not a CDM 12 or any variation of

Might be a DVD based mech (going off what looks a rather wide ribbon connector)

The turntable looks more like for CD... DVD drives have rubber base to grip disk for fast acceleration/deceleration.

yairf · 19th November 2009, 12:50 PM

Hi
I need to take the whole thing apart to see underneath.
I'm not so sure it's a laser problem, I did play a bit with the spindle and the skipping stopped for a while...
Cheers,
Yair

Mooly · 19th November 2009, 01:02 PM

Most skipping problems are caused by the sled not moving freely.
Motors, spindle and sled can play up. It can be worth (after disconnecting them) applying a 9 volt battery to burn any rubbish of the commutator. You would have to remove the gears to do that or the teeth will be damaged.

19th November 2009, 11:03 AM	#1
yairf diyAudio Member Join Date: Nov 2003 Location: Israel	Can you spot that CD transport (laser skipping problem) Hi all I need help identifying this CD transport. It is part of Brendensen CDP-1. I'm not sure whether this is a CD-Rom or some sort of Philips CDM-12 . Any help help spotting this will be appreciated. Thanks, Yair

19th November 2009, 12:46 PM	#2
Mooly diyAudio Member Join Date: Sep 2007	What does it say on the pickup. It's definitely not a CDM 12 or any variation of Might be a DVD based mech (going off what looks a rather wide ribbon connector) The turntable looks more like for CD... DVD drives have rubber base to grip disk for fast acceleration/deceleration. Last edited by Mooly; 19th November 2009 at 12:53 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Arcam alpha 7 CD - replaced laser but still skipping..	Greenderek	Digital Source	6	29th June 2010 12:32 PM
DCD-1550AR strange skipping problem	OneyedK	Digital Source	0	23rd October 2007 10:51 AM
Technics SL-P990 Skipping- Laser adjustment?	matski	Digital Source	15	11th July 2007 09:07 AM
Skipping problem with Nad541 cdp	andy2	Digital Source	1	13th December 2005 07:37 AM
Meridian transport skipping Philips CDM4	Monkey King	Digital Source	0	23rd May 2004 03:43 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th November 2009, 12:50 PM	#3
yairf diyAudio Member Join Date: Nov 2003 Location: Israel	Hi I need to take the whole thing apart to see underneath. I'm not so sure it's a laser problem, I did play a bit with the spindle and the skipping stopped for a while... Cheers, Yair

19th November 2009, 01:02 PM	#4
Mooly diyAudio Member Join Date: Sep 2007	Most skipping problems are caused by the sled not moving freely. Motors, spindle and sled can play up. It can be worth (after disconnecting them) applying a 9 volt battery to burn any rubbish of the commutator. You would have to remove the gears to do that or the teeth will be damaged.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)