Help needed on Denon DCD-695 CD player - diyAudio
Go Back   Home > Forums > Source & Line > Digital Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 5th October 2009, 03:13 AM   #1
diyAudio Member
Join Date: Sep 2006
Default Help needed on Denon DCD-695 CD player

Hi guys,
A friend of mine gave me this Denon CD player, model DCD-695. It can power up but the CD tray when open will not stop to allow me to place the CD on it. It will close immediately right after extending to the max.
I managed to hold the tray for a while to load in a CD. Itís not able to read the disc properly but I do notice the lens move up & down vertically. There was once it managed to read the content of the CD (I think) but when I hit the ďPlayĒ button, the lens will move slowly back & fore horizontally failing to play the track. The spinning speed of the CD is also not consistent.
I also noticed the CD is tilted higher at the back when itís clamped on the transport. I reference these with the spacing between the CD & the tray, the spacing is more at the back.
I guess the easy way is to replace the whole transport. May I know what model of transport is this?
Any other suggestions is greatly appreciated.
  Reply With Quote
Old 5th October 2009, 06:43 PM   #2
diyAudio Member
tiefbassuebertr's Avatar
Join Date: Jul 2005
Location: D-55629 Schwarzerden
Please disass'y the internal switch (so called "disc-in disc-out" in your service manual) inside of the loader and clean it carefully at it's contacts. If you have this done, check the other functions.
If you need the optical pick up (Type: KSS-240A), please note, there are many suppliers with bad quality, especially by very cheap offers.
Please check also the position of the four different springs for the subchassis (perhaps the reason, because CD is tilted higher at the back when it’s clamped on the transport).

Last edited by tiefbassuebertr; 5th October 2009 at 06:50 PM.
  Reply With Quote
Old 6th October 2009, 03:08 AM   #3
diyAudio Member
Join Date: Sep 2006
Hi tiefbassuebert,
Thanks for the reply. Iíll work on the internal switch that u mentioned.
Am I suppose to adjust the 4 different springs on the sub-chassis to level the CD when itís clamped?
  Reply With Quote
Old 14th October 2009, 05:01 PM   #4
diyAudio Member
tiefbassuebertr's Avatar
Join Date: Jul 2005
Location: D-55629 Schwarzerden
you cannot adjust this springs. Either they are in the correct position or not. Please check also the damper rubbers inside of the springs. Sometimes a hardening of the rubber material is observed. Then replace the rubbers.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
DENON CD Player Model 800 miamibob Digital Source 0 30th October 2008 10:01 PM
Denon CD player 690G Tubesin Digital Source 0 20th December 2007 12:25 PM
Need a schematic for a Denon DCM-260 CD player gaetan8888 Digital Source 5 31st July 2007 02:12 AM
Denon DCDS10 CD player radar Digital Source 2 16th May 2007 07:13 AM
How to wire in a fan in a Denon 2800 DVD player ccdoggy Everything Else 3 1st March 2007 02:51 PM

New To Site? Need Help?

All times are GMT. The time now is 08:33 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2