diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Digital Source (http://www.diyaudio.com/forums/digital-source/)
-   -   VAM1254 (VAM 1254) servo/decoding PCB for CDM0 (CDM 0) - CDM3 (CDM-3) (http://www.diyaudio.com/forums/digital-source/152777-vam1254-vam-1254-servo-decoding-pcb-cdm0-cdm-0-cdm3-cdm-3-a.html)

tiefbassuebertr 1st October 2009 12:40 PM

VAM1254 (VAM 1254) servo/decoding PCB for CDM0 (CDM 0) - CDM3 (CDM-3)
 
Combination of best cd transport mechanism and best cd signal/servo processing (SAA7324 M2) for ultimate sonic reproduction about compact disc - who have experience with this and the appropriate modifications at the VAM1254 servo- and signal processing board?

I am shure, that disc hall motor and all optical parts of the optical pick up from CDM-3 is much more better (and much more easier for repair, because the appropriate p-sub laser diode is not hard to find) than that one of the VAM versions with cheap, no brushless Mabuchi disc motor, hologram laserdiodes and plastic suspension and collominator lens

Best thanks for your comments

here the weblinks:
http://www.daisy-laser.com/products/...f/cdpro2lf.htm
http://www.daisy-laser.com/products/...fVAMspec11.pdf
http://vintage-audio-laser.com/technics/cdm0_350px.jpg (CDM-0)
http://farm3.static.flickr.com/2149/...d4876f84ff.jpg (CDM-3)

tiefbassuebertr 22nd December 2009 02:16 PM

realy no informations?


All times are GMT. The time now is 07:30 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2