Combination of best cd transport mechanism and best cd signal/servo processing (SAA7324 M2) for ultimate sonic reproduction about compact disc - who have experience with this and the appropriate modifications at the VAM1254 servo- and signal processing board?
I am shure, that disc hall motor and all optical parts of the optical pick up from CDM-3 is much more better (and much more easier for repair, because the appropriate p-sub laser diode is not hard to find) than that one of the VAM versions with cheap, no brushless Mabuchi disc motor, hologram laserdiodes and plastic suspension and collominator lens
Best thanks for your comments
here the weblinks:
http://www.daisy-laser.com/products/modules/cd/cdpro2lf/cdpro2lf.htm
http://www.daisy-laser.com/products/CD/modules/CDPro2/cdpro2lfVAMspec11.pdf
http://vintage-audio-laser.com/technics/cdm0_350px.jpg (CDM-0)
http://farm3.static.flickr.com/2149/2263495317_d4876f84ff.jpg (CDM-3)
I am shure, that disc hall motor and all optical parts of the optical pick up from CDM-3 is much more better (and much more easier for repair, because the appropriate p-sub laser diode is not hard to find) than that one of the VAM versions with cheap, no brushless Mabuchi disc motor, hologram laserdiodes and plastic suspension and collominator lens
Best thanks for your comments
here the weblinks:
http://www.daisy-laser.com/products/modules/cd/cdpro2lf/cdpro2lf.htm
http://www.daisy-laser.com/products/CD/modules/CDPro2/cdpro2lfVAMspec11.pdf
http://vintage-audio-laser.com/technics/cdm0_350px.jpg (CDM-0)
http://farm3.static.flickr.com/2149/2263495317_d4876f84ff.jpg (CDM-3)
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.