No sound from M-audio 192

kop89 · 22nd July 2009, 08:47 PM

Hi,

I am trying to use my installed M-audio AP192 for the first time. I hooked up the SPDIF output from AP192 to my DAC, and playing the FLAC files using MediaMonkey.

I cannot get any sound so far. Not sure where to start with the troubleshooting.

Can anyone help me with suggestions?

Thanks

kop89 · 22nd July 2009, 09:07 PM

The Ap192 seems to work normally - sample rate shows "44.1" when playing CD files, and "96kHz" when playing hi-res files.
problem is, my DAC cannot see anything from the AP192 SPDIF output.

hafp · 23rd July 2009, 04:02 PM

Sounds like you need to configure the settings in your DAW software to SPDIF output; assuming your 192 card is working properly.
Have you loaded the updated drivers and DAW from M-Audio.
Good luck.
Cheers.

kop89 · 25th July 2009, 05:25 AM

After messing around with this for the whole day, it turned out the problem was with my DAC unit. The ground on the SPDIF RCA jack was broken. Resoldered the wire and everything worked fine.

22nd July 2009, 08:47 PM	#1
kop89 diyAudio Member Join Date: Feb 2008	No sound from M-audio 192 Hi, I am trying to use my installed M-audio AP192 for the first time. I hooked up the SPDIF output from AP192 to my DAC, and playing the FLAC files using MediaMonkey. I cannot get any sound so far. Not sure where to start with the troubleshooting. Can anyone help me with suggestions? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do all audio amplifiers really sound the same???	SleeperSupra	Solid State	1321	13th June 2008 09:15 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd July 2009, 09:07 PM	#2
kop89 diyAudio Member Join Date: Feb 2008	The Ap192 seems to work normally - sample rate shows "44.1" when playing CD files, and "96kHz" when playing hi-res files. problem is, my DAC cannot see anything from the AP192 SPDIF output.

23rd July 2009, 04:02 PM	#3
hafp diyAudio Member Join Date: Feb 2008	Sounds like you need to configure the settings in your DAW software to SPDIF output; assuming your 192 card is working properly. Have you loaded the updated drivers and DAW from M-Audio. Good luck. Cheers.

25th July 2009, 05:25 AM	#4
kop89 diyAudio Member Join Date: Feb 2008	After messing around with this for the whole day, it turned out the problem was with my DAC unit. The ground on the SPDIF RCA jack was broken. Resoldered the wire and everything worked fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)