I am just about finished modding my denon dvd2900 and all was going great..Now I have a problem on the right channel audio.
The music is there but very distorted and very bass heavy.It is also much louder than the left channel which is fine.I have done all the usual things like swapping IC cables switching channels etc..
I have replaced all opamps and signal path resistors as well as all the coupling capacitors around the opamps with polystyrene.
The player was working so I am confident that in instalation was correct.
I have checked all my solder connections and reflowed most.
I think that it is a component problem but I was wondering if my symptoms point to something specific... ie. capacitor, resistor etc..
Any suggestions would be greatly appreciated!!!
The music is there but very distorted and very bass heavy.It is also much louder than the left channel which is fine.I have done all the usual things like swapping IC cables switching channels etc..
I have replaced all opamps and signal path resistors as well as all the coupling capacitors around the opamps with polystyrene.
The player was working so I am confident that in instalation was correct.
I have checked all my solder connections and reflowed most.
I think that it is a component problem but I was wondering if my symptoms point to something specific... ie. capacitor, resistor etc..
Any suggestions would be greatly appreciated!!!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.