Marantz CD-65ll manual needed, or guide on removing the CDM-4/19

data · 13th December 2008, 07:42 AM

Hay guys

I desperately need help to swap the laser over from one Marantz payer to the other, the donor player is a CD-593 using a CDM-4 transport and the receiving player is a CD-65ll using the CDM-4/19

But I have no manuals and can't work out how to take the assembly apart on either of these

Please help me...

data · 13th December 2008, 09:11 AM

I made a typo, It's a CD-65ll not 64...

data · 13th December 2008, 11:44 AM

Well I managed to swap the transport mech's over and am still getting the read error

Don't know where to look now for the cause of the error

The guy I bought it from said it worked fine before he posted it to me

SY · 13th December 2008, 11:46 AM

Fixed.

data · 13th December 2008, 11:50 AM

Thanks for fixing up my typos SY

Now I just need the same to happen with this player

es44 · 13th December 2008, 12:00 PM

I'm sorry i can't help you with practical advise, but i have a schematic (with block diagram), for the 65II, maybe it is useful ?
Just say the word, and it's coming your way.

Best regards
Ebbe

poynton · 13th December 2008, 12:08 PM

Is (was) the cd593 a working player ?

If so, verify that both cdm4s are working.

Andy

poynton · 13th December 2008, 12:13 PM

Quote:

Originally posted by es44
I'm sorry i can't help you with practical advise, but i have a schematic (with block diagram), for the 65II, maybe it is useful ?
Just say the word, and it's coming your way.

Best regards
Ebbe

If you have a manual for the CD65II , please uoload it to OSTRIPPERs site so all can access it.

OStripper's Schematic/Datasheet archive

Andy

data · 13th December 2008, 01:13 PM

es44, the that would be healpful as the issue is beyound the transport part

Thanks.

poynton, yes the 593 was working well, so the transport & laser are known good, and it turned out both are 4/19's

poynton · 13th December 2008, 01:27 PM

Quote:

Originally posted by data
................. the transport & laser are known good...................

So what is it doing?
What are the symptoms?

Andy

13th December 2008, 07:42 AM	#1
data diyAudio Member Join Date: Jul 2007 Location: Brisbane	Marantz CD-65ll manual needed, or guide on removing the CDM-4/19 Hay guys I desperately need help to swap the laser over from one Marantz payer to the other, the donor player is a CD-593 using a CDM-4 transport and the receiving player is a CD-65ll using the CDM-4/19 But I have no manuals and can't work out how to take the assembly apart on either of these Please help me...

13th December 2008, 11:46 AM	#4
SY diyAudio Moderator Join Date: Oct 2002 Location: Austin, TX Blog Entries: 1	Fixed. __________________ “Listening to records is like ****ing a picture of Brigitte Bardot.” - Sergiu Celibidache

13th December 2008, 12:08 PM	#7
poynton Magneto the Gravity Man diyAudio Member Join Date: Mar 2005 Location: A life on the ocean waves when I'm not at home in N. Wales (but I'm not Welsh so no sheep jokes!)	Is (was) the cd593 a working player ? If so, verify that both cdm4s are working. Andy __________________ If it ain't broke, break it !! Then fix it again. It's called DIY !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
small help with Marantz 6000 mod (removing PCB)	sanjeev	Digital Source	0	6th June 2009 02:02 AM
Service Manual needed Marantz Model 112	Tom7227	Parts	0	2nd March 2009 09:24 PM
service manual for MARANTZ SR 5300 NEEDED PLS HELP	kumarnarayan	Solid State	0	4th November 2008 02:09 PM
Needed: Marantz 2130 manual	wboyd	Everything Else	4	26th October 2007 08:17 PM
Help needed - Marantz MAR770/MAR775 service manual	ergo	Digital Source	1	11th November 2004 07:45 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th December 2008, 09:11 AM	#2
data diyAudio Member Join Date: Jul 2007 Location: Brisbane	I made a typo, It's a CD-65ll not 64...

13th December 2008, 11:44 AM	#3
data diyAudio Member Join Date: Jul 2007 Location: Brisbane	Well I managed to swap the transport mech's over and am still getting the read error Don't know where to look now for the cause of the error The guy I bought it from said it worked fine before he posted it to me

13th December 2008, 11:50 AM	#5
data diyAudio Member Join Date: Jul 2007 Location: Brisbane	Thanks for fixing up my typos SY Now I just need the same to happen with this player

13th December 2008, 12:00 PM	#6
es44 diyAudio Member Join Date: Apr 2005 Location: Fredericia, DK	I'm sorry i can't help you with practical advise, but i have a schematic (with block diagram), for the 65II, maybe it is useful ? Just say the word, and it's coming your way. Best regards Ebbe

13th December 2008, 01:13 PM	#9
data diyAudio Member Join Date: Jul 2007 Location: Brisbane	es44, the that would be healpful as the issue is beyound the transport part Thanks. poynton, yes the 593 was working well, so the transport & laser are known good, and it turned out both are 4/19's

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read